[build-status: 169551] Log for successful build of apertium-dbus_0.1-1 (dist=unstable)
Build Daemon 2
buildd2 at linux-m32r.org
Fri Sep 12 10:25:00 JST 2008
Automatic build of apertium-dbus_0.1-1 on mappi005 by sbuild/m32r 98-farm
Build started at 20080912-0922
******************************************************************************
Checking available source versions...
Fetching source files...
Reading package lists...
Building dependency tree...
Reading state information...
Need to get 69.9kB of source archives.
Get:1 http://debian.linux-m32r.org 06_devonian/main apertium-dbus 0.1-1 (dsc) [778B]
Get:2 http://debian.linux-m32r.org 06_devonian/main apertium-dbus 0.1-1 (tar) [67.2kB]
Get:3 http://debian.linux-m32r.org 06_devonian/main apertium-dbus 0.1-1 (diff) [1866B]
Fetched 69.9kB in 1s (44.7kB/s)
Download complete and in download only mode
** Using build dependencies supplied by package:
Build-Depends: autotools-dev, cdbs, debhelper (>= 5), libapertium3-3.0-0-dev (>= 3.0.2), libdbus-1-3 (>= 0.34), libdbus-1-dev (>= 0.34), pkg-config (>= 0.21), python (>= 2.4.0), python-dbus (>= 0.82)
Checking for already installed source dependencies...
autotools-dev: already installed (20080123.2)
cdbs: already installed (0.4.52)
debhelper: already installed (7.0.17 >= 5 is satisfied)
libapertium3-3.0-0-dev: missing
Using default version 3.0.7+1-1 (Priority: 500)
libdbus-1-3: already installed (1.1.20-1 >= 0.34 is satisfied)
libdbus-1-dev: already installed (1.1.20-1 >= 0.34 is satisfied)
pkg-config: already installed (0.22-1 >= 0.21 is satisfied)
python: already installed (2.4.4-6 >= 2.4.0 is satisfied)
python-dbus: already installed (0.82.4-1 >= 0.82 is satisfied)
Checking for source dependency conflicts...
/usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install libapertium3-3.0-0-dev
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
libhal-storage-dev texlive-latex-recommended-doc texlive-latex-base-doc tcl
texlive-fonts-recommended-doc libpq4
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
libapertium3-3.0-0 liblttoolbox3-3.0-0
The following NEW packages will be installed:
libapertium3-3.0-0 libapertium3-3.0-0-dev liblttoolbox3-3.0-0
0 upgraded, 3 newly installed, 0 to remove and 43 not upgraded.
Need to get 1277kB of archives.
After this operation, 6517kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
liblttoolbox3-3.0-0 libapertium3-3.0-0 libapertium3-3.0-0-dev
Authentication warning overridden.
Get:1 http://debian.linux-m32r.org 06_devonian/main liblttoolbox3-3.0-0 3.0.2+1-1 [129kB]
Get:2 http://debian.linux-m32r.org 06_devonian/main libapertium3-3.0-0 3.0.7+1-1 [352kB]
Get:3 http://debian.linux-m32r.org 06_devonian/main libapertium3-3.0-0-dev 3.0.7+1-1 [795kB]
Fetched 1277kB in 14s (88.7kB/s)
Selecting previously deselected package liblttoolbox3-3.0-0.
(Reading database ... 61130 files and directories currently installed.)
Unpacking liblttoolbox3-3.0-0 (from .../liblttoolbox3-3.0-0_3.0.2+1-1_m32r.deb) ...
Selecting previously deselected package libapertium3-3.0-0.
Unpacking libapertium3-3.0-0 (from .../libapertium3-3.0-0_3.0.7+1-1_m32r.deb) ...
Selecting previously deselected package libapertium3-3.0-0-dev.
Unpacking libapertium3-3.0-0-dev (from .../libapertium3-3.0-0-dev_3.0.7+1-1_m32r.deb) ...
Setting up liblttoolbox3-3.0-0 (3.0.2+1-1) ...
Setting up libapertium3-3.0-0 (3.0.7+1-1) ...
Setting up libapertium3-3.0-0-dev (3.0.7+1-1) ...
Checking correctness of source dependencies...
Toolchain package versions: libc6-dev_2.3.6.ds1-13 linux-kernel-headers_2.6.18-7 gcc-4.1_4.1.1-21 g++-4.1_4.1.1-21 binutils_2.18.1~cvs20080103-1 libstdc++6-4.1-dev_4.1.1-21 libstdc++6_4.1.1-21
------------------------------------------------------------------------------
dpkg-source: extracting apertium-dbus in apertium-dbus-0.1
dpkg-source: info: unpacking apertium-dbus_0.1.orig.tar.gz
dpkg-source: info: applying apertium-dbus_0.1-1.diff.gz
dpkg-buildpackage: set CFLAGS to default value: -g -O2
dpkg-buildpackage: set CPPFLAGS to default value:
dpkg-buildpackage: set LDFLAGS to default value:
dpkg-buildpackage: set FFLAGS to default value: -g -O2
dpkg-buildpackage: set CXXFLAGS to default value: -g -O2
dpkg-buildpackage: source package apertium-dbus
dpkg-buildpackage: source version 0.1-1
dpkg-buildpackage: host architecture m32r
/usr/bin/fakeroot debian/rules clean
test -x debian/rules
dh_testroot
dh_clean
/usr/bin/make -C . -k distclean
make[1]: Entering directory `/build/buildd2/apertium-dbus-0.1'
make[1]: *** No rule to make target `distclean'.
make[1]: Leaving directory `/build/buildd2/apertium-dbus-0.1'
make: [makefile-clean] Error 2 (ignored)
rm -f debian/stamp-makefile-build
rm -f debian/stamp-autotools-files
debian/rules build
test -x debian/rules
mkdir -p "."
touch debian/stamp-autotools-files
chmod a+x /build/buildd2/apertium-dbus-0.1/./configure
cd . && CC="cc" CXX="g++" CFLAGS="-g -O2 -g -Wall -O2" CXXFLAGS="-g -O2 -g -Wall -O2" CPPFLAGS="" LDFLAGS="" /build/buildd2/apertium-dbus-0.1/./configure --build=m32r-linux-gnu --prefix=/usr --includedir="\${prefix}/include" --mandir="\${prefix}/share/man" --infodir="\${prefix}/share/info" --sysconfdir=/etc --localstatedir=/var --libexecdir="\${prefix}/lib/apertium-dbus" --disable-maintainer-mode --disable-dependency-tracking --srcdir=.
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for python... /usr/bin/python
checking for python version... 2.4
checking for python platform... linux2
checking for python script directory... ${prefix}/lib/python2.4/site-packages
checking for python extension module directory... ${exec_prefix}/lib/python2.4/site-packages
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for APERTIUM... yes
checking for DBUS... yes
checking for PYDBUS... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating org.apertium.mode.service
config.status: creating org.apertium.info.service
/usr/bin/make -C .
make[1]: Entering directory `/build/buildd2/apertium-dbus-0.1'
Making all in src
make[2]: Entering directory `/build/buildd2/apertium-dbus-0.1/src'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/build/buildd2/apertium-dbus-0.1/src'
make[2]: Entering directory `/build/buildd2/apertium-dbus-0.1'
make[2]: Nothing to be done for `all-am'.
make[2]: Leaving directory `/build/buildd2/apertium-dbus-0.1'
make[1]: Leaving directory `/build/buildd2/apertium-dbus-0.1'
touch debian/stamp-makefile-build
DEB_MAKE_CHECK_TARGET unset, not running checks
/usr/bin/fakeroot debian/rules binary-arch
test -x debian/rules
dh_testroot
dh_clean -k
dh_installdirs -A
mkdir -p "."
DEB_MAKE_CHECK_TARGET unset, not running checks
/usr/bin/make -C . install DESTDIR=/build/buildd2/apertium-dbus-0.1/debian/apertium-dbus/
make[1]: Entering directory `/build/buildd2/apertium-dbus-0.1'
Making install in src
make[2]: Entering directory `/build/buildd2/apertium-dbus-0.1/src'
make[3]: Entering directory `/build/buildd2/apertium-dbus-0.1/src'
make[3]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/apertium/dbus-1" || mkdir -p -- "/build/buildd2/apertium-dbus-0.1/debian/apertium-dbus//usr/share/apertium/dbus-1"
/usr/bin/ginstall -c -m 644 'info.py' '/build/buildd2/apertium-dbus-0.1/debian/apertium-dbus//usr/share/apertium/dbus-1/info.py'
/usr/bin/ginstall -c -m 644 'mode.py' '/build/buildd2/apertium-dbus-0.1/debian/apertium-dbus//usr/share/apertium/dbus-1/mode.py'
/usr/bin/ginstall -c -m 644 'service.py' '/build/buildd2/apertium-dbus-0.1/debian/apertium-dbus//usr/share/apertium/dbus-1/service.py'
/usr/bin/ginstall -c -m 644 'command_line.py' '/build/buildd2/apertium-dbus-0.1/debian/apertium-dbus//usr/share/apertium/dbus-1/command_line.py'
Byte-compiling python modules...
info.py mode.py service.py command_line.py
Byte-compiling python modules (optimized versions) ...
info.py mode.py service.py command_line.py
test -z "/usr/share/apertium/dbus-1" || mkdir -p -- "/build/buildd2/apertium-dbus-0.1/debian/apertium-dbus//usr/share/apertium/dbus-1"
/usr/bin/ginstall -c 'info.py' '/build/buildd2/apertium-dbus-0.1/debian/apertium-dbus//usr/share/apertium/dbus-1/info.py'
/usr/bin/ginstall -c 'mode.py' '/build/buildd2/apertium-dbus-0.1/debian/apertium-dbus//usr/share/apertium/dbus-1/mode.py'
make[3]: Leaving directory `/build/buildd2/apertium-dbus-0.1/src'
make[2]: Leaving directory `/build/buildd2/apertium-dbus-0.1/src'
make[2]: Entering directory `/build/buildd2/apertium-dbus-0.1'
make[3]: Entering directory `/build/buildd2/apertium-dbus-0.1'
make[3]: Nothing to be done for `install-exec-am'.
/usr/bin/ginstall -c -m 644 org.apertium.info.service /build/buildd2/apertium-dbus-0.1/debian/apertium-dbus//usr/share/dbus-1/services/
/usr/bin/ginstall -c -m 644 org.apertium.mode.service /build/buildd2/apertium-dbus-0.1/debian/apertium-dbus//usr/share/dbus-1/services/
make[3]: Leaving directory `/build/buildd2/apertium-dbus-0.1'
make[2]: Leaving directory `/build/buildd2/apertium-dbus-0.1'
make[1]: Leaving directory `/build/buildd2/apertium-dbus-0.1'
dh_installdirs -papertium-dbus
dh_installdocs -papertium-dbus ./README ./NEWS ./AUTHORS
dh_installexamples -papertium-dbus
dh_installman -papertium-dbus
dh_installinfo -papertium-dbus
dh_installmenu -papertium-dbus
dh_installcron -papertium-dbus
dh_installinit -papertium-dbus
dh_installdebconf -papertium-dbus
dh_installemacsen -papertium-dbus
dh_installcatalogs -papertium-dbus
dh_installpam -papertium-dbus
dh_installlogrotate -papertium-dbus
dh_installlogcheck -papertium-dbus
dh_installchangelogs -papertium-dbus ./ChangeLog
dh_installudev -papertium-dbus
dh_lintian -papertium-dbus
dh_install -papertium-dbus
dh_link -papertium-dbus
dh_installmime -papertium-dbus
dh_strip -papertium-dbus
dh_compress -papertium-dbus
dh_fixperms -papertium-dbus
dh_makeshlibs -papertium-dbus
dh_installdeb -papertium-dbus
dh_perl -papertium-dbus
dh_shlibdeps -papertium-dbus
dh_gencontrol -papertium-dbus
dpkg-gencontrol: warning: unknown substitution variable ${shlibs:Depends}
dpkg-gencontrol: warning: unknown substitution variable ${misc:Depends}
dh_md5sums -papertium-dbus
dh_builddeb -papertium-dbus
dpkg-deb: building package `apertium-dbus' in `../apertium-dbus_0.1-1_m32r.deb'.
dpkg-genchanges -B -mHirokazu Takata <takata at linux-m32r.org> >../apertium-dbus_0.1-1_m32r.changes
dpkg-genchanges: arch-specific upload - not including arch-independent packages
dpkg-genchanges: binary-only upload - not including any source code
dpkg-buildpackage: binary only upload (no source included)
******************************************************************************
Build finished at 20080912-1021
chroot-unstable/build/buildd2/apertium-dbus_0.1-1_m32r.deb:
new debian package, version 2.0.
size 9244 bytes: control archive= 1078 bytes.
658 bytes, 18 lines control
1543 bytes, 21 lines md5sums
Package: apertium-dbus
Version: 0.1-1
Architecture: m32r
Maintainer: Francis Tyers <ftyers at prompsit.com>
Installed-Size: 124
Depends: python (>= 2.4.0), dbus (>= 1.1.2), apertium (>= 3.0.2)
Section: misc
Priority: extra
Homepage: http://www.apertium.org
Description: A D-Bus service for the Apertium machine translation system
A D-Bus service for the Apertium machine translation
system, allows Apertium to be used for machine translation for
any installed language pair from inside any programming
language which has D-Bus bindings.
.
To use this service you need the Apertium engine
installed, and at least one linguistic package or
language pair.
chroot-unstable/build/buildd2/apertium-dbus_0.1-1_m32r.deb:
drwxr-xr-x root/root 0 2008-09-12 10:16 ./
drwxr-xr-x root/root 0 2008-09-12 10:12 ./usr/
drwxr-xr-x root/root 0 2008-09-12 10:14 ./usr/share/
drwxr-xr-x root/root 0 2008-09-12 10:12 ./usr/share/dbus-1/
drwxr-xr-x root/root 0 2008-09-12 10:13 ./usr/share/dbus-1/services/
-rw-r--r-- root/root 88 2008-09-12 10:13 ./usr/share/dbus-1/services/org.apertium.info.service
-rw-r--r-- root/root 81 2008-09-12 10:13 ./usr/share/dbus-1/services/org.apertium.mode.service
drwxr-xr-x root/root 0 2008-09-12 10:14 ./usr/share/doc/
drwxr-xr-x root/root 0 2008-09-12 10:19 ./usr/share/doc/apertium-dbus/
-rw-r--r-- root/root 1336 2008-09-12 10:04 ./usr/share/doc/apertium-dbus/copyright
-rw-r--r-- root/root 88 2008-02-07 19:33 ./usr/share/doc/apertium-dbus/changelog.gz
-rw-r--r-- root/root 84 2008-01-20 02:57 ./usr/share/doc/apertium-dbus/AUTHORS
-rw-r--r-- root/root 365 2008-09-12 10:04 ./usr/share/doc/apertium-dbus/README.Debian
-rw-r--r-- root/root 304 2008-01-20 02:57 ./usr/share/doc/apertium-dbus/README
-rw-r--r-- root/root 74 2008-02-07 19:34 ./usr/share/doc/apertium-dbus/NEWS.gz
-rw-r--r-- root/root 159 2008-09-12 10:04 ./usr/share/doc/apertium-dbus/changelog.Debian.gz
drwxr-xr-x root/root 0 2008-09-12 10:13 ./usr/share/apertium/
drwxr-xr-x root/root 0 2008-09-12 10:13 ./usr/share/apertium/dbus-1/
-rwxr-xr-x root/root 2215 2008-09-12 10:13 ./usr/share/apertium/dbus-1/info.py
-rw-r--r-- root/root 3086 2008-09-12 10:13 ./usr/share/apertium/dbus-1/info.pyc
-rw-r--r-- root/root 3726 2008-09-12 10:13 ./usr/share/apertium/dbus-1/mode.pyo
-rw-r--r-- root/root 3726 2008-09-12 10:13 ./usr/share/apertium/dbus-1/mode.pyc
-rwxr-xr-x root/root 2629 2008-09-12 10:13 ./usr/share/apertium/dbus-1/mode.py
-rw-r--r-- root/root 1580 2008-09-12 10:13 ./usr/share/apertium/dbus-1/service.pyc
-rw-r--r-- root/root 836 2008-09-12 10:13 ./usr/share/apertium/dbus-1/service.py
-rw-r--r-- root/root 1580 2008-09-12 10:13 ./usr/share/apertium/dbus-1/service.pyo
-rw-r--r-- root/root 3086 2008-09-12 10:13 ./usr/share/apertium/dbus-1/info.pyo
-rw-r--r-- root/root 907 2008-09-12 10:13 ./usr/share/apertium/dbus-1/command_line.py
-rw-r--r-- root/root 999 2008-09-12 10:13 ./usr/share/apertium/dbus-1/command_line.pyo
-rw-r--r-- root/root 999 2008-09-12 10:13 ./usr/share/apertium/dbus-1/command_line.pyc
apertium-dbus_0.1-1_m32r.changes:
Format: 1.8
Date: Thu, 07 Feb 2008 10:42:43 +0000
Source: apertium-dbus
Binary: apertium-dbus
Architecture: m32r
Version: 0.1-1
Distribution: unstable
Urgency: low
Maintainer: Hirokazu Takata <takata at linux-m32r.org>
Changed-By: Francis Tyers <ftyers at prompsit.com>
Description:
apertium-dbus - A D-Bus service for the Apertium machine translation system
Closes: 464570
Changes:
apertium-dbus (0.1-1) unstable; urgency=low
.
* Initial release (Closes: #464570)
Checksums-Sha1:
a02454be01f53083dbf2617c2e0ea49445d4f4fa 9244 apertium-dbus_0.1-1_m32r.deb
Checksums-Sha256:
af97442c961bc7322aed990b09f46e4b24691697cda6d58f34a76d672d9230f0 9244 apertium-dbus_0.1-1_m32r.deb
Files:
78149e937c4750eaf7a779bbe82b148e 9244 misc extra apertium-dbus_0.1-1_m32r.deb
******************************************************************************
Built successfully
Purging chroot-unstable/build/buildd2/apertium-dbus-0.1
------------------------------------------------------------------------------
/usr/bin/sudo dpkg --root=/debian/buildd2/build/chroot-unstable --purge libapertium3-3.0-0-dev liblttoolbox3-3.0-0 libapertium3-3.0-0
(Reading database ... 61174 files and directories currently installed.)
Removing libapertium3-3.0-0-dev ...
Removing libapertium3-3.0-0 ...
Purging configuration files for libapertium3-3.0-0 ...
Removing liblttoolbox3-3.0-0 ...
Purging configuration files for liblttoolbox3-3.0-0 ...
******************************************************************************
Finished at 20080912-1024
Build needed 00:19:18, 568k disk space
More information about the build-status
mailing list