[build-status: 126560] Log for successful build of foomatic-db-engine_3.0.2-20080211-1 (dist=unstable)
Build Daemon 2
buildd2 at linux-m32r.org
Tue May 20 05:53:11 JST 2008
Automatic build of foomatic-db-engine_3.0.2-20080211-1 on mappi005 by sbuild/m32r 98-farm
Build started at 20080520-0525
******************************************************************************
Checking available source versions...
Fetching source files...
Reading package lists...
Building dependency tree...
Reading state information...
Need to get 336kB of source archives.
Get:1 http://debian.linux-m32r.org 06_devonian/main foomatic-db-engine 3.0.2-20080211-1 (dsc) [689B]
Get:2 http://debian.linux-m32r.org 06_devonian/main foomatic-db-engine 3.0.2-20080211-1 (tar) [333kB]
Get:3 http://debian.linux-m32r.org 06_devonian/main foomatic-db-engine 3.0.2-20080211-1 (diff) [1743B]
Fetched 336kB in 8s (37.3kB/s)
Download complete and in download only mode
** Using build dependencies supplied by package:
Build-Depends: debhelper (>> 4), libxml2-dev, perl
Checking for already installed source dependencies...
debhelper: already installed (7.0.8 >> 4 is satisfied)
libxml2-dev: already installed (2.6.32.dfsg-1)
perl: already installed (5.8.8-7)
Checking for source dependency conflicts...
Checking correctness of source dependencies...
Toolchain package versions: libc6-dev_2.3.6.ds1-13 linux-kernel-headers_2.6.18-7 gcc-4.1_4.1.1-21 g++-4.1_4.1.1-21 binutils_2.18.1~cvs20080103-1 libstdc++6-4.1-dev_4.1.1-21 libstdc++6_4.1.1-21
/usr/bin/dpkg --set-selections failed------------------------------------------------------------------------------
dpkg-source: extracting foomatic-db-engine in foomatic-db-engine-3.0.2-20080211
dpkg-source: info: unpacking foomatic-db-engine_3.0.2-20080211.orig.tar.gz
dpkg-source: info: applying foomatic-db-engine_3.0.2-20080211-1.diff.gz
dpkg-buildpackage: set CFLAGS to default value: -g -O2
dpkg-buildpackage: set CPPFLAGS to default value:
dpkg-buildpackage: set LDFLAGS to default value:
dpkg-buildpackage: set FFLAGS to default value: -g -O2
dpkg-buildpackage: set CXXFLAGS to default value: -g -O2
dpkg-buildpackage: source package foomatic-db-engine
dpkg-buildpackage: source version 3.0.2-20080211-1
dpkg-buildpackage: host architecture m32r
/usr/bin/fakeroot debian/rules clean
dh_testdir
dh_testroot
rm -f build-stamp
# Add here commands to clean up after the build process.
/usr/bin/make distclean
make[1]: Entering directory `/build/buildd2/foomatic-db-engine-3.0.2-20080211'
make[1]: *** No rule to make target `distclean'. Stop.
make[1]: Leaving directory `/build/buildd2/foomatic-db-engine-3.0.2-20080211'
make: [clean] Error 2 (ignored)
rm -f config.log config.cache config.sub config.guess foomatic-ppdload
dh_clean
debian/rules build
dh_testdir
# Add here commands to configure the package.
cp -f /usr/share/misc/config.sub config.sub
cp -f /usr/share/misc/config.guess config.guess
CFLAGS="-Wall -g -O2" NC=/bin/nc ./configure --host=m32r-linux-gnu --build=m32r-linux-gnu --prefix=/usr --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info
checking for m32r-linux-gnu-gcc... m32r-linux-gnu-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether m32r-linux-gnu-gcc accepts -g... yes
checking for m32r-linux-gnu-gcc option to accept ANSI C... none needed
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking whether ln -s works... yes
checking whether make sets $(MAKE)... yes
checking for xml2-config... /usr/bin/xml2-config
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking how to run the C preprocessor... m32r-linux-gnu-gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for an ANSI C-conforming const... yes
checking for strdup... yes
checking for strspn... yes
checking for strstr... yes
checking for xmlParseFile... no
checking for xmlCreatePushParserCtxt... no
checking for xmlParseChunk... no
checking for xmlFreeParserCtxt... no
checking for xmlFreeDoc... no
checking for xmlDocGetRootElement... no
checking for xmlNodeListGetString... no
checking for file... /usr/bin/file
checking for cat... /bin/cat
checking for gs... /usr/bin/gs
checking for a2ps... A2PS_NOT_FOUND
checking for wget... /usr/bin/wget
checking for curl... /usr/bin:/bin:/usr/local/bin:/usr/sbin:/sbin:/usr/local/sbin:/etc/sbin
checking for printf... /usr/bin/printf
checking GhostScript check... no
GS /usr/bin/gs
checking how to redirect GhostScript output to fd 3... using /dev/fd/3
checking for perl... /usr/bin/perl
Checking whether Perl will find libraries installed under /usr... yes
checking for bash... /bin/bash
checking for lpd/... no
checking for lp-errs... /var/log/lp-errs
checking for lpd... no
checking for printcap... /etc/printcap
checking for lpd.conf... no
checking for lpr-lpd... no
checking for lpr-lprng... no
checking for lpr-lpr... no
checking for lpr... no
checking for lpq-lpd... no
checking for lpq-lprng... no
checking for lpq-lpr... no
checking for lpq... no
checking for lprm-lpd... no
checking for lprm-lprng... no
checking for lprm-lpr... no
checking for lprm... no
checking for lpc-lpd... no
checking for lpc-lprng... no
checking for lpc-lpr... no
checking for lpc... no
checking for checkpc... no
checking for cups/... /etc/cups
checking for lpadmin... no
checking for lpstat... no
checking for cups/model/... no
checking for cups/filter/... no
checking for cups/backend/... no
checking for cups/... no
checking for cups/printers.conf... no
checking for lpr-cups... no
checking for lpr... no
checking for lpq-cups... no
checking for lpq... no
checking for lprm-cups... no
checking for lprm... no
checking for lpc-cups... no
checking for lpc... no
checking for lp-cups... no
checking for lp... no
checking for cancel-cups... no
checking for cancel... no
checking for enable... no
checking for disable... no
checking for accept... no
checking for reject... no
checking for lpmove... no
checking for lpoptions... no
checking for lpinfo... no
checking for pdq/... no
checking for pdq/printrc... no
checking for pdq... no
checking for lpr-pdq... no
checking for ppr/bin/pprd... no
checking for ppr/interfaces/... no
checking for ppr/PPDFiles/... no
checking for ppr/... no
checking for ppr... no
checking for lpr-ppr... no
checking for ppad... no
checking for ppop... no
checking for nc... /bin/nc
checking for rlpr... no
checking for smbclient... no
checking for nprint... no
checking for ptal-connect... no
checking for ptal-printd/... no
checking for mtink/... no
checking for gzip... /bin/gzip
checking for foomatic/db/source/... no
checking for db/source/... no
checking for foomatic-rip... no
checking for foomatic-rip... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating makeDefaults
config.status: creating makeMan
config.status: creating foomatic-configure
config.status: creating foomatic-printjob
config.status: creating foomatic-kitload
config.status: creating foomatic-ppdfile
config.status: creating foomatic-preferred-driver
config.status: creating foomatic-cleanupdrivers
config.status: creating foomatic-getpjloptions
config.status: creating foomatic-addpjloptions
config.status: creating foomatic-compiledb
config.status: creating foomatic-fix-xml
config.status: creating foomatic-nonumericalids
config.status: creating foomatic-replaceoldprinterids
config.status: creating foomatic-ppd-options
config.status: creating foomatic-printermap-to-gutenprint-xml
config.status: creating foomatic-extract-text
config.status: creating foomatic-searchprinter
Finished configuring.
Type 'make' to build the package
then 'make install' to install it.
dh_testdir
# Add here commands to compile the package.
/usr/bin/make PERL_INSTALLDIRS=vendor
make[1]: Entering directory `/build/buildd2/foomatic-db-engine-3.0.2-20080211'
chmod a+rx ./makeDefaults
./makeDefaults
if [ x = x--inplace ] ; then touch .testing-stamp ; fi
( cd lib && /usr/bin/perl Makefile.PL verbose INSTALLDIRS=vendor )
ABSTRACT => q[Foomatic printer configuration library code]
AUTHOR => q[Grant Taylor <gtaylor+pht at picante.com>]
INSTALLDIRS => q[vendor]
NAME => q[Foomatic]
PREFIX => q[/usr]
PREREQ_PM => { }
Using PERL=/usr/bin/perl
Writing Makefile for Foomatic
m32r-linux-gnu-gcc -Wall -g -O2 -o foomatic-combo-xml foomatic-combo-xml.c
foomatic-combo-xml.c: In function 'parse':
foomatic-combo-xml.c:494: warning: 'return' with no value, in function returning non-void
foomatic-combo-xml.c:1170: warning: 'return' with no value, in function returning non-void
foomatic-combo-xml.c:1230: warning: 'return' with no value, in function returning non-void
foomatic-combo-xml.c:1418: warning: 'return' with no value, in function returning non-void
foomatic-combo-xml.c:295: warning: unused variable 'optiondefault'
foomatic-combo-xml.c:276: warning: unused variable 'constrainttoberemoved'
foomatic-combo-xml.c: In function 'main':
foomatic-combo-xml.c:1796: warning: unused variable 'tmpstr1'
foomatic-combo-xml.c:1795: warning: unused variable 'j'
foomatic-combo-xml.c:2022: warning: 'make' is used uninitialized in this function
foomatic-combo-xml.c:2022: warning: 'model' is used uninitialized in this function
m32r-linux-gnu-gcc -Wall -g -O2 -I/usr/include/libxml2 -lxml2 -o foomatic-perl-data foomatic-perl-data.c
foomatic-perl-data.c: In function 'getLocalizedText':
foomatic-perl-data.c:464: warning: pointer targets in passing argument 2 of 'xmlStrcasecmp' differ in signedness
foomatic-perl-data.c:464: warning: pointer targets in passing argument 2 of 'xmlStrcasecmp' differ in signedness
foomatic-perl-data.c: In function 'parseOverviewPrinter':
foomatic-perl-data.c:666: warning: unused variable 'charset'
foomatic-perl-data.c:665: warning: unused variable 'id'
foomatic-perl-data.c: In function 'parseComboDriver':
foomatic-perl-data.c:1850: warning: suggest explicit braces to avoid ambiguous 'else'
foomatic-perl-data.c: In function 'parseChoices':
foomatic-perl-data.c:2052: warning: pointer targets in passing argument 4 of 'getLocalizedText' differ in signedness
foomatic-perl-data.c:2003: warning: unused variable 'cur3'
foomatic-perl-data.c: In function 'parseOptions':
foomatic-perl-data.c:2155: warning: pointer targets in passing argument 4 of 'getLocalizedText' differ in signedness
foomatic-perl-data.c:2160: warning: pointer targets in passing argument 4 of 'getLocalizedText' differ in signedness
foomatic-perl-data.c: In function 'parseDriverEntry':
foomatic-perl-data.c:3034: warning: suggest explicit braces to avoid ambiguous 'else'
foomatic-perl-data.c: In function 'parseXMLFromStdin':
foomatic-perl-data.c:3201: warning: unused variable 'f'
foomatic-perl-data.c: In function 'prepareComboData':
foomatic-perl-data.c:3558: warning: pointer targets in assignment differ in signedness
foomatic-perl-data.c: In function 'generateComboPerlData':
foomatic-perl-data.c:3934: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
foomatic-perl-data.c:3934: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
foomatic-perl-data.c:3934: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
foomatic-perl-data.c:3934: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
foomatic-perl-data.c:3934: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
foomatic-perl-data.c:3934: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
foomatic-perl-data.c:3934: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
foomatic-perl-data.c:3934: warning: pointer targets in passing argument 1 of 'strncmp' differ in signedness
foomatic-perl-data.c:4366: warning: pointer targets in assignment differ in signedness
foomatic-perl-data.c: In function 'generatePrinterPerlData':
foomatic-perl-data.c:4540: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
foomatic-perl-data.c:4540: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
foomatic-perl-data.c:4540: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
foomatic-perl-data.c:4540: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
foomatic-perl-data.c:4540: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
foomatic-perl-data.c:4540: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
foomatic-perl-data.c:4540: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness
foomatic-perl-data.c:4540: warning: pointer targets in passing argument 1 of 'strncmp' differ in signedness
foomatic-perl-data.c: In function 'generateDriverPerlData':
foomatic-perl-data.c:4600: warning: unused variable 'printers'
foomatic-perl-data.c:4599: warning: unused variable 'num_printers'
foomatic-perl-data.c:4598: warning: unused variable 'comment'
foomatic-perl-data.c:4597: warning: unused variable 'cmd'
foomatic-perl-data.c:4596: warning: unused variable 'driver_type'
foomatic-perl-data.c:4595: warning: unused variable 'url'
foomatic-perl-data.c:4594: warning: unused variable 'name'
foomatic-perl-data.c:4593: warning: unused variable 'id'
foomatic-perl-data.c: In function 'main':
foomatic-perl-data.c:4816: warning: pointer targets in initialization differ in signedness
foomatic-perl-data.c:4858: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness
foomatic-perl-data.c:4858: warning: pointer targets in passing argument 1 of '__strdup' differ in signedness
foomatic-perl-data.c:4858: warning: pointer targets in assignment differ in signedness
chmod a+rx ./makeMan
./makeMan
for m in foomatic-printjob foomatic-configure foomatic-combo-xml foomatic-perl-data foomatic-ppdfile foomatic-compiledb foomatic-ppd-options foomatic-searchprinter foomatic-kitload foomatic-getpjloptions foomatic-addpjloptions foomatic-preferred-driver foomatic-fix-xml foomatic-nonumericalids foomatic-replaceoldprinterids foomatic-printermap-to-gutenprint-xml foomatic-cleanupdrivers foomatic-extract-text; do \
/usr/bin/perl -p -i -e "s=use lib '.*lib/';\n==s" $m; \
done
chmod a+rx Makefile makeDefaults makeMan foomatic-configure foomatic-printjob foomatic-kitload foomatic-ppdfile foomatic-preferred-driver foomatic-cleanupdrivers foomatic-getpjloptions foomatic-addpjloptions foomatic-compiledb foomatic-fix-xml foomatic-nonumericalids foomatic-replaceoldprinterids foomatic-ppd-options foomatic-printermap-to-gutenprint-xml foomatic-extract-text foomatic-searchprinter mkinstalldirs
make[1]: Leaving directory `/build/buildd2/foomatic-db-engine-3.0.2-20080211'
#/usr/bin/docbook-to-man debian/foomatic-db-engine.sgml > foomatic-db-engine.1
touch build-stamp
/usr/bin/fakeroot debian/rules binary-arch
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
# Add here commands to install the package into
# debian/foomatic-db-engine.
#
# Set NOECHO= to get debugging output from the Perl installation
/usr/bin/make install DESTDIR=/build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine PERL_INSTALLDIRS=vendor VENDORPREFIX=/usr PERLPREFIX=/usr
make[1]: Entering directory `/build/buildd2/foomatic-db-engine-3.0.2-20080211'
( cd lib && \
/usr/bin/make PREFIX=/usr && \
/usr/bin/make PREFIX=/build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr pure_install \
)
make[2]: Entering directory `/build/buildd2/foomatic-db-engine-3.0.2-20080211/lib'
cp Foomatic/DB.pm blib/lib/Foomatic/DB.pm
cp Foomatic/UIElem.pm blib/lib/Foomatic/UIElem.pm
cp Foomatic/Defaults.pm blib/lib/Foomatic/Defaults.pm
cp Foomatic/PPD.pm blib/lib/Foomatic/PPD.pm
make[2]: Leaving directory `/build/buildd2/foomatic-db-engine-3.0.2-20080211/lib'
make[2]: Entering directory `/build/buildd2/foomatic-db-engine-3.0.2-20080211/lib'
Installing /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/perl5/Foomatic/PPD.pm
Installing /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/perl5/Foomatic/UIElem.pm
Installing /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/perl5/Foomatic/Defaults.pm
Installing /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/perl5/Foomatic/DB.pm
make[2]: Leaving directory `/build/buildd2/foomatic-db-engine-3.0.2-20080211/lib'
./mkinstalldirs /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/bin
./mkinstalldirs /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/sbin
./mkinstalldirs /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/etc/foomatic
mkdir /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/etc
mkdir /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/etc/foomatic
./mkinstalldirs /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/foomatic/templates
mkdir /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/foomatic
mkdir /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/foomatic/templates
/usr/bin/ginstall -c -m 755 foomatic-printjob foomatic-configure foomatic-combo-xml foomatic-perl-data foomatic-ppdfile foomatic-compiledb foomatic-ppd-options foomatic-searchprinter /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/bin
/usr/bin/ginstall -c -m 755 foomatic-kitload foomatic-getpjloptions foomatic-addpjloptions foomatic-preferred-driver foomatic-fix-xml foomatic-nonumericalids foomatic-replaceoldprinterids foomatic-printermap-to-gutenprint-xml foomatic-cleanupdrivers foomatic-extract-text /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/sbin
( cd foomatic-templates && \
/usr/bin/ginstall -c -m 644 pjl_enum_choice.xml pjl_enum_option.xml pjl_num_option.xml /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/foomatic/templates \
)
/usr/bin/perl -p -i -e "s:foomatic-templates:/usr/share/foomatic/templates:g" /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/sbin/foomatic-addpjloptions
ln -sf foomatic-ppdfile /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/bin/foomatic-datafile
if [ -d /usr/lib/cups ]; then \
./mkinstalldirs /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/lib/cups/driver; \
ln -sf /usr/bin/foomatic-ppdfile /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/lib/cups/driver/foomatic; \
fi
./mkinstalldirs /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/man
mkdir /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/man
./mkinstalldirs /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/man/man1
mkdir /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/man/man1
./mkinstalldirs /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/man/man8
mkdir /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/man/man8
/usr/bin/ginstall -c -m 644 *.1 /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/man/man1
/usr/bin/ginstall -c -m 644 *.8 /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/man/man8
make[1]: Leaving directory `/build/buildd2/foomatic-db-engine-3.0.2-20080211'
(cd /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/share/man/man1; ln -s foomatic-ppdfile.1.gz foomatic-datafile.1.gz)
rm -rf /build/buildd2/foomatic-db-engine-3.0.2-20080211/debian/foomatic-db-engine/usr/lib
dh_testdir -a
dh_testroot -a
dh_installchangelogs -a ChangeLog
dh_installdocs -a
dh_installexamples -a
dh_install -a debian/presubj usr/share/bug/foomatic-db-engine
dh_installdebconf -a
dh_installman -a
ERROR: ld.so: object 'libfakeroot-sysv.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot-sysv.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot-sysv.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot-sysv.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot-sysv.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot-sysv.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot-sysv.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot-sysv.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot-sysv.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot-sysv.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot-sysv.so' from LD_PRELOAD cannot be preloaded: ignored.
dh_link -a
dh_strip -a
dh_compress -a
dh_fixperms -a
dh_perl -a
dh_installdeb -a
dh_shlibdeps -a
dh_gencontrol -a
dh_md5sums -a
dh_builddeb -a
dpkg-deb: building package `foomatic-db-engine' in `../foomatic-db-engine_3.0.2-20080211-1_m32r.deb'.
dpkg-genchanges -B -mHirokazu Takata <takata at linux-m32r.org> >../foomatic-db-engine_3.0.2-20080211-1_m32r.changes
dpkg-genchanges: arch-specific upload - not including arch-independent packages
dpkg-genchanges: binary-only upload - not including any source code
dpkg-buildpackage: binary only upload (no source included)
******************************************************************************
Build finished at 20080520-0552
chroot-unstable/build/buildd2/foomatic-db-engine_3.0.2-20080211-1_m32r.deb:
new debian package, version 2.0.
size 286688 bytes: control archive= 2417 bytes.
1650 bytes, 36 lines control
3342 bytes, 46 lines md5sums
Package: foomatic-db-engine
Version: 3.0.2-20080211-1
Architecture: m32r
Maintainer: Chris Lawrence <lawrencc at debian.org>
Installed-Size: 860
Pre-Depends: bash (>= 2.05)
Depends: perl (>= 5.6.0-16), libc6 (>= 2.3.5-1), libxml2 (>= 2.6.27), foomatic-db, foomatic-filters, wget | curl
Recommends: netcat
Suggests: foomatic-db-hpijs, foomatic-db-gutenprint, foomatic-gui
Conflicts: foomatic-bin (<< 2.9), foomatic-db (<< 2.9)
Replaces: foomatic-bin (<< 2.9)
Section: text
Priority: optional
Homepage: http://www.openprinting.org/
Description: OpenPrinting printer support - programs
Foomatic is a printing system designed to make it easier to set up
common printers for use with Debian (and other operating systems).
It provides the "glue" between a print spooler (like CUPS or lpr) and
your actual printer, by telling your computer how to process files
sent to the printer.
.
This package contains the architecture-dependent programs needed to
set up and maintain the foomatic system. You will also need one or
more database packages. The foomatic-db package includes drivers for
most common printers using Ghostscript as the print processor, as
well as some common glue code used in other filter systems.
.
foomatic-db-hpijs includes support for photo-quality printing with
Hewlett-Packard and some other consumer inkjets using the HPIJS
backend developed by HP.
.
foomatic-db-gutenprint includes support for photo-quality printing
with many consumer inkjets (including those from HP and Epson).
.
foomatic-gui provides a GNOME-based setup tool for Foomatic printer
queues using the command-line tools provided in this package.
chroot-unstable/build/buildd2/foomatic-db-engine_3.0.2-20080211-1_m32r.deb:
drwxr-xr-x root/root 0 2008-05-20 05:47 ./
drwxr-xr-x root/root 0 2008-05-20 05:45 ./etc/
drwxr-xr-x root/root 0 2008-05-20 05:45 ./etc/foomatic/
drwxr-xr-x root/root 0 2008-05-20 05:45 ./usr/
drwxr-xr-x root/root 0 2008-05-20 05:45 ./usr/sbin/
-rwxr-xr-x root/root 2606 2008-05-20 05:45 ./usr/sbin/foomatic-replaceoldprinterids
-rwxr-xr-x root/root 4570 2008-05-20 05:45 ./usr/sbin/foomatic-extract-text
-rwxr-xr-x root/root 4497 2008-05-20 05:45 ./usr/sbin/foomatic-nonumericalids
-rwxr-xr-x root/root 3246 2008-05-20 05:45 ./usr/sbin/foomatic-kitload
-rwxr-xr-x root/root 1539 2008-05-20 05:45 ./usr/sbin/foomatic-fix-xml
-rwxr-xr-x root/root 5105 2008-05-20 05:45 ./usr/sbin/foomatic-printermap-to-gutenprint-xml
-rwxr-xr-x root/root 9238 2008-05-20 05:45 ./usr/sbin/foomatic-preferred-driver
-rwxr-xr-x root/root 2136 2008-05-20 05:45 ./usr/sbin/foomatic-getpjloptions
-rwxr-xr-x root/root 1371 2008-05-20 05:45 ./usr/sbin/foomatic-cleanupdrivers
-rwxr-xr-x root/root 29858 2008-05-20 05:45 ./usr/sbin/foomatic-addpjloptions
drwxr-xr-x root/root 0 2008-05-20 05:47 ./usr/bin/
-rwxr-xr-x root/root 2487 2008-05-20 05:45 ./usr/bin/foomatic-searchprinter
-rwxr-xr-x root/root 41904 2008-05-20 05:47 ./usr/bin/foomatic-combo-xml
-rwxr-xr-x root/root 58272 2008-05-20 05:47 ./usr/bin/foomatic-perl-data
-rwxr-xr-x root/root 4000 2008-05-20 05:45 ./usr/bin/foomatic-ppd-options
-rwxr-xr-x root/root 9170 2008-05-20 05:45 ./usr/bin/foomatic-ppdfile
-rwxr-xr-x root/root 35088 2008-05-20 05:45 ./usr/bin/foomatic-printjob
-rwxr-xr-x root/root 5363 2008-05-20 05:45 ./usr/bin/foomatic-compiledb
-rwxr-xr-x root/root 136795 2008-05-20 05:45 ./usr/bin/foomatic-configure
drwxr-xr-x root/root 0 2008-05-20 05:46 ./usr/share/
drwxr-xr-x root/root 0 2008-05-20 05:47 ./usr/share/bug/
drwxr-xr-x root/root 0 2008-05-20 05:47 ./usr/share/bug/foomatic-db-engine/
-rw-r--r-- root/root 510 2008-02-12 06:14 ./usr/share/bug/foomatic-db-engine/presubj
drwxr-xr-x root/root 0 2008-05-20 05:45 ./usr/share/perl5/
drwxr-xr-x root/root 0 2008-05-20 05:45 ./usr/share/perl5/Foomatic/
-rw-r--r-- root/root 9662 2008-02-12 06:14 ./usr/share/perl5/Foomatic/PPD.pm
-rw-r--r-- root/root 674 2008-02-12 06:14 ./usr/share/perl5/Foomatic/UIElem.pm
-rw-r--r-- root/root 2879 2008-05-20 05:38 ./usr/share/perl5/Foomatic/Defaults.pm
-rw-r--r-- root/root 170000 2008-02-12 06:14 ./usr/share/perl5/Foomatic/DB.pm
drwxr-xr-x root/root 0 2008-05-20 05:45 ./usr/share/foomatic/
drwxr-xr-x root/root 0 2008-05-20 05:45 ./usr/share/foomatic/templates/
-rw-r--r-- root/root 752 2008-05-20 05:45 ./usr/share/foomatic/templates/pjl_enum_option.xml
-rw-r--r-- root/root 490 2008-05-20 05:45 ./usr/share/foomatic/templates/pjl_enum_choice.xml
-rw-r--r-- root/root 770 2008-05-20 05:45 ./usr/share/foomatic/templates/pjl_num_option.xml
drwxr-xr-x root/root 0 2008-05-20 05:46 ./usr/share/doc/
drwxr-xr-x root/root 0 2008-05-20 05:48 ./usr/share/doc/foomatic-db-engine/
-rw-r--r-- root/root 1232 2008-02-12 06:14 ./usr/share/doc/foomatic-db-engine/TODO
-rw-r--r-- root/root 162 2008-05-20 05:34 ./usr/share/doc/foomatic-db-engine/TODO.Debian
-rw-r--r-- root/root 712 2008-02-12 06:14 ./usr/share/doc/foomatic-db-engine/copyright
-rw-r--r-- root/root 44519 2008-02-12 06:14 ./usr/share/doc/foomatic-db-engine/changelog.gz
-rw-r--r-- root/root 16231 2008-02-12 06:14 ./usr/share/doc/foomatic-db-engine/USAGE.gz
-rw-r--r-- root/root 2817 2008-02-12 06:14 ./usr/share/doc/foomatic-db-engine/Foomatic-Devel-Ideas.txt.gz
-rw-r--r-- root/root 3144 2008-02-12 06:14 ./usr/share/doc/foomatic-db-engine/README.Debian
-rw-r--r-- root/root 44758 2008-02-12 06:14 ./usr/share/doc/foomatic-db-engine/README.gz
-rw-r--r-- root/root 5803 2008-05-20 05:34 ./usr/share/doc/foomatic-db-engine/changelog.Debian.gz
drwxr-xr-x root/root 0 2008-05-20 05:45 ./usr/share/man/
drwxr-xr-x root/root 0 2008-05-20 05:48 ./usr/share/man/man1/
-rw-r--r-- root/root 923 2008-05-20 05:47 ./usr/share/man/man1/foomatic-compiledb.1.gz
-rw-r--r-- root/root 531 2008-05-20 05:47 ./usr/share/man/man1/foomatic-perl-data.1.gz
-rw-r--r-- root/root 2150 2008-05-20 05:47 ./usr/share/man/man1/foomatic-configure.1.gz
-rw-r--r-- root/root 1192 2008-05-20 05:47 ./usr/share/man/man1/foomatic-printjob.1.gz
-rw-r--r-- root/root 876 2008-05-20 05:47 ./usr/share/man/man1/foomatic-ppd-options.1.gz
-rw-r--r-- root/root 952 2008-05-20 05:47 ./usr/share/man/man1/foomatic-ppdfile.1.gz
-rw-r--r-- root/root 494 2008-05-20 05:47 ./usr/share/man/man1/foomatic-combo-xml.1.gz
drwxr-xr-x root/root 0 2008-05-20 05:48 ./usr/share/man/man8/
-rw-r--r-- root/root 920 2008-05-20 05:47 ./usr/share/man/man8/foomatic-kitload.8.gz
-rw-r--r-- root/root 384 2008-05-20 05:47 ./usr/share/man/man8/foomatic-preferred-driver.8.gz
-rw-r--r-- root/root 924 2008-05-20 05:47 ./usr/share/man/man8/foomatic-addpjloptions.8.gz
-rw-r--r-- root/root 938 2008-05-20 05:47 ./usr/share/man/man8/foomatic-getpjloptions.8.gz
lrwxrwxrwx root/root 0 2008-05-20 05:47 ./usr/bin/foomatic-datafile -> foomatic-ppdfile
lrwxrwxrwx root/root 0 2008-05-20 05:47 ./usr/share/man/man1/foomatic-datafile.1.gz -> foomatic-ppdfile.1.gz
foomatic-db-engine_3.0.2-20080211-1_m32r.changes:
Format: 1.8
Date: Thu, 21 Feb 2008 15:09:30 -0600
Source: foomatic-db-engine
Binary: foomatic-db-engine
Architecture: m32r
Version: 3.0.2-20080211-1
Distribution: unstable
Urgency: low
Maintainer: Hirokazu Takata <takata at linux-m32r.org>
Changed-By: Chris Lawrence <lawrencc at debian.org>
Description:
foomatic-db-engine - OpenPrinting printer support - programs
Closes: 384022 415929 449620
Changes:
foomatic-db-engine (3.0.2-20080211-1) unstable; urgency=low
.
* New upstream release.
* Update Homepage. (Closes: #384022)
* Update debian/watch. (Closes: #449620, #415929)
Checksums-Sha1:
34fb3c48d33fa59109d693d725afcaf89715be6f 286688 foomatic-db-engine_3.0.2-20080211-1_m32r.deb
Checksums-Sha256:
9d481324c5cc2a8b385c957d09ccb05f0807141ecb4156db819c97c4a8d50dca 286688 foomatic-db-engine_3.0.2-20080211-1_m32r.deb
Files:
81fae82cc9af913000484926f678ffc7 286688 text optional foomatic-db-engine_3.0.2-20080211-1_m32r.deb
******************************************************************************
Built successfully
Purging chroot-unstable/build/buildd2/foomatic-db-engine-3.0.2-20080211
------------------------------------------------------------------------------
******************************************************************************
Finished at 20080520-0553
Build needed 00:19:28, 3824k disk space
More information about the build-status
mailing list