[build-status: 77569] Log for successful build of pexts_0.2.0-8 (dist=unstable)
Build Daemon 3
buildd3 at linux-m32r.org
Thu Jun 14 00:35:26 JST 2007
Automatic build of pexts_0.2.0-8 on mappi006 by sbuild/m32r 0.53
Build started at 20070613-2227
******************************************************************************
Checking available source versions...
Fetching source files...
Reading package lists...
Building dependency tree...
Need to get 670kB of source archives.
Get:1 http://debian.linux-m32r.org 06_devonian/main pexts 0.2.0-8 (dsc) [952B]
Get:2 http://debian.linux-m32r.org 06_devonian/main pexts 0.2.0-8 (tar) [646kB]
Get:3 http://debian.linux-m32r.org 06_devonian/main pexts 0.2.0-8 (diff) [23.2kB]
Fetched 670kB in 7s (88.4kB/s)
Download complete and in download only mode
** Using build dependencies supplied by package:
Build-Depends: debhelper (>> 4.1.16), pike7.6-core (>= 7.6.93-1), pike7.6-dev (>= 7.6.93-1), libnewt-dev, libmhash-dev, libpam0g-dev, libbz2-dev, libncurses5-dev, autoconf (>> 2.53), automake1.9, libtool, libpcre3-dev, libmcrypt-dev, libgeoip-dev (>= 1.3.16-1)
Checking for already installed source dependencies...
debhelper: already installed (5.0.50 >> 4.1.16 is satisfied)
pike7.6-core: missing
Using default version 7.6.93-3
pike7.6-dev: missing
Using default version 7.6.93-3
libnewt-dev: missing
libmhash-dev: already installed (0.9.7-1)
libpam0g-dev: already installed (0.79-4)
libbz2-dev: already installed (1.0.3-7)
libncurses5-dev: already installed (5.6-3)
autoconf: already installed (2.61-4 >> 2.53 is satisfied)
automake1.9: already installed (1.9.6+nogfdl-3)
libtool: already installed (1.5.22-4)
libpcre3-dev: already installed (6.7-1)
libmcrypt-dev: already installed (2.5.7-5)
libgeoip-dev: missing
Using default version 1.3.17-1.1
Checking for source dependency conflicts...
Reading package lists...
Building dependency tree...
The following extra packages will be installed:
libgeoip1 libnettle2 libnewt0.52 libslang2-dev
Suggested packages:
geoip-bin pike7.6-doc
Recommended packages:
pike7.6-image
The following NEW packages will be installed:
libgeoip-dev libgeoip1 libnettle2 libnewt-dev libnewt0.52 libslang2-dev
pike7.6-core pike7.6-dev
0 upgraded, 8 newly installed, 0 to remove and 27 not upgraded.
Need to get 3454kB/4600kB of archives.
After unpacking 18.8MB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
libnewt0.52 libgeoip1 libgeoip-dev libnettle2 libslang2-dev libnewt-dev
pike7.6-core pike7.6-dev
Authentication warning overridden.
Get:1 http://debian.linux-m32r.org 06_devonian/main libnettle2 1.15-2 [152kB]
Get:2 http://debian.linux-m32r.org 06_devonian/main pike7.6-core 7.6.93-3 [3048kB]
Get:3 http://debian.linux-m32r.org 06_devonian/main pike7.6-dev 7.6.93-3 [254kB]
Fetched 3454kB in 33s (103kB/s)
Selecting previously deselected package libnewt0.52.
(Reading database ... 58875 files and directories currently installed.)
Unpacking libnewt0.52 (from .../libnewt0.52_0.52.2-10_m32r.deb) ...
Selecting previously deselected package libgeoip1.
Unpacking libgeoip1 (from .../libgeoip1_1.3.17-1.1_m32r.deb) ...
Selecting previously deselected package libgeoip-dev.
Unpacking libgeoip-dev (from .../libgeoip-dev_1.3.17-1.1_m32r.deb) ...
Selecting previously deselected package libnettle2.
Unpacking libnettle2 (from .../libnettle2_1.15-2_m32r.deb) ...
Selecting previously deselected package libslang2-dev.
Unpacking libslang2-dev (from .../libslang2-dev_2.0.7-1_m32r.deb) ...
Selecting previously deselected package libnewt-dev.
Unpacking libnewt-dev (from .../libnewt-dev_0.52.2-10_m32r.deb) ...
Selecting previously deselected package pike7.6-core.
Unpacking pike7.6-core (from .../pike7.6-core_7.6.93-3_m32r.deb) ...
Selecting previously deselected package pike7.6-dev.
Unpacking pike7.6-dev (from .../pike7.6-dev_7.6.93-3_all.deb) ...
Setting up libnewt0.52 (0.52.2-10) ...
Setting up libgeoip1 (1.3.17-1.1) ...
Setting up libgeoip-dev (1.3.17-1.1) ...
Setting up libnettle2 (1.15-2) ...
Setting up libslang2-dev (2.0.7-1) ...
Setting up libnewt-dev (0.52.2-10) ...
Setting up pike7.6-core (7.6.93-3) ...
Setting up pike7.6-dev (7.6.93-3) ...
Checking correctness of source dependencies...
Kernel: Linux 2.6.20 m32r (m32r)
Toolchain package versions: libc6-dev_2.3.6.ds1-13 linux-kernel-headers_2.6.18-7.0.1 gcc-4.1_4.1.1-21 g++-4.1_4.1.1-21 binutils_2.17-3 libstdc++6-4.1-dev_4.1.1-21 libstdc++6_4.1.1-21
------------------------------------------------------------------------------
gpg: Signature made Fri Mar 16 20:30:48 2007 JST using DSA key ID 807CAC25
gpg: Can't check signature: public key not found
dpkg-source: extracting pexts in pexts-0.2.0
dpkg-source: unpacking pexts_0.2.0.orig.tar.gz
dpkg-source: applying /debian/buildd3/build/pexts_0.2.0-8.diff.gz
dpkg-buildpackage: source package is pexts
dpkg-buildpackage: source version is 0.2.0-8
dpkg-buildpackage: source changed by Michael Ablassmeier <abi at debian.org>
dpkg-buildpackage: host architecture m32r
dpkg-buildpackage: source version without epoch 0.2.0-8
/usr/bin/fakeroot debian/rules clean
if [ -f patched-stamp ]; then \
for f in /build/buildd3/pexts-0.2.0/debian/patches/*.diff; do \
patch -R -p1 -f --no-backup-if-mismatch -d /build/buildd3/pexts-0.2.0 < $f ; \
done ; \
rm -f patched-stamp ; \
fi
/usr/bin/make spotless
make[1]: Entering directory `/build/buildd3/pexts-0.2.0'
make[1]: *** No rule to make target `spotless'. Stop.
make[1]: Leaving directory `/build/buildd3/pexts-0.2.0'
make: [inter-clean] Error 2 (ignored)
rm -f src/PCRE/pcrelib/dftables
rm -f `find -name ".cvsignore" -type f -print`
rm -rf `find -name "CVS" -type d -print`
rm -f smartlink statuslock
dh_clean
dh_testdir
rm -f build-stamp-76 configure-stamp-76 patched-stamp
rm -f configure config.h.in config.log configure.ac
rm -rf debian/pike7.6 debian/pike
debian/rules build
if [ ! -f patched-stamp ]; then \
for f in /build/buildd3/pexts-0.2.0/debian/patches/*.diff; do \
patch -p1 -f --no-backup-if-mismatch -d /build/buildd3/pexts-0.2.0 < $f ; \
done ; \
fi
patching file Makefile.in
patching file src/PCRE/configure.ac
patching file src/PCRE/Makefile.in
patching file tools/smartlink
touch patched-stamp
/usr/bin/make -fdebian/rules PVER=7.6 do-configure-common
make[1]: Entering directory `/build/buildd3/pexts-0.2.0'
dh_testdir
# Add here commands to configure the package.
if test "yes" = "yes"; then \
./autogen.sh; \
fi
Cleaning the directories
Generating the list of modules
Module Newt is disabled.
Module _BerkeleyDB is disabled.
Module _esmtp is disabled.
Module gpgme is disabled.
configure.ac:386: warning: underquoted definition of AC_SYS_COMPILER_FLAG
run info '(automake)Extending aclocal'
or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
configure.ac:406: warning: underquoted definition of AC_SYS_CPU_COMPILER_FLAG
configure.ac:413: warning: underquoted definition of AC_SYS_OS_COMPILER_FLAG
acinclude.m4:87: warning: underquoted definition of AM_PATH_LIBMCRYPT
acinclude.m4:320: warning: underquoted definition of ACX_PATH_LIBESMTP
acinclude.m4:510: warning: underquoted definition of AM_PATH_GPGME
acinclude.m4:679: warning: underquoted definition of AM_PATH_XML
acinclude.m4:874: warning: underquoted definition of AM_PATH_XML2
/usr/share/aclocal/libmcrypt.m4:17: warning: underquoted definition of AM_PATH_LIBMCRYPT
Running autogen in 'src/.'
Running autogen in 'src/AVS'
Running autogen in 'src/AdminTools'
Running autogen in 'src/Curses'
Running autogen in 'src/GeoIP'
Running autogen in 'src/Gzip'
Running autogen in 'src/Magic'
Running autogen in 'src/Mailstore'
Running autogen in 'src/Mailstore/libmutt'
You should add the contents of `/usr/share/aclocal/libtool.m4' to `aclocal.m4'.
/usr/share/aclocal/libmcrypt.m4:17: warning: underquoted definition of AM_PATH_LIBMCRYPT
run info '(automake)Extending aclocal'
or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
configure.ac: installing `./install-sh'
configure.ac: installing `./missing'
imap/Makefile.am: installing `./depcomp'
Running autogen in 'src/Mhash'
Running autogen in 'src/OpenLDAP'
Running autogen in 'src/OpenSSL'
Running autogen in 'src/PCRE'
Running autogen in 'src/PCRE/pcrelib'
Running autogen in 'src/PDF'
Running autogen in 'src/_FDF'
Running autogen in 'src/_Newt'
Running autogen in 'src/_XML'
Running autogen in 'src/_XSLT'
Running autogen in 'src/bzip2'
Running autogen in 'src/mcast'
Running autogen in 'src/mcrypt'
Running autogen in 'src/mnoGo'
./configure --prefix=/usr \
--with-pike=/usr/bin/pike7.6 \
--without-_esmtp \
--without-_FDF \
--without-PDF \
--without-_BerkeleyDB \
--without-Newt \
--without-gpgme \
--without-mnoGo \
--without-OpenSSL \
--without-OpenLDAP \
--without-_XML \
--without-mcast \
--without-Mailstore \
--without-FNV \
--without-ferite \
--without-AVS \
--with-GeoIP \
--with-bzip2
shtool:echo:Warning: unable to determine terminal sequence for bold mode
shtool:echo:Warning: unable to determine terminal sequence for bold mode
checking build system type... m32r-unknown-linux-gnu
checking host system type... m32r-unknown-linux-gnu
checking whether make sets $(MAKE)... yes
checking for a BSD-compatible install... /usr/bin/ginstall -c
configure: WARNING: Converted . to /build/buildd3/pexts-0.2.0,
If this does not work, please use an absolute path to the configure script.
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for AIX... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking for dlopen in -ldl... yes
checking for shl_load in -ldld... no
checking for dld_link in -ldld... no
checking for uname... /bin/uname
checking operating system... Linux
checking for a working Pike (>= 7.0.78)...
.../usr/bin/pike7.6 7.6.93 => good version, /usr/include/pike/7.6.93
found Pike 7.6.93 (/usr/bin/pike7.6) with C headers in -I/usr/include/pike/7.6.93
checking for a available module locations...
considering /usr/lib/pike/7.6.93/lib/modules => winner
checking for extra include directories...
checking /usr/include... added
checking /usr/local/include... added
checking /sw/local/include... no
checking /usr/gnu/include... no
checking /opt/gnu/include... no
checking /sw/gnu/include... no
checking /sw/include... no
checking /usr/freeware/include... no
checking /usr/pkg/include... no
checking /usr/X11R6/include... added
checking for extra library directories...
checking /usr/lib... added
checking /usr/local/lib... added
checking /sw/local/lib... no
checking /sw/lib... no
checking /usr/gnu/lib... no
checking /opt/gnu/lib... no
checking /sw/gnu/lib... no
checking /usr/freeware/lib... no
checking /usr/pkg/lib... no
checking /usr/X11R6/lib... added
checking for libgcc file name... /usr/lib/gcc/m32r-linux-gnu/4.1.2/libgcc.a
checking SO... so
checking LDSHARED... /build/buildd3/pexts-0.2.0/tools/smartlink gcc -shared
checking CCSHARED... -fpic
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
=== configuring in src (/build/buildd3/pexts-0.2.0/src)
configure: running /bin/sh /build/buildd3/pexts-0.2.0/src/configure '--prefix=/usr' '--with-pike=/usr/bin/pike7.6' '--without-_esmtp' '--without-_FDF' '--without-PDF' '--without-_BerkeleyDB' '--without-Newt' '--without-gpgme' '--without-mnoGo' '--without-OpenSSL' '--without-OpenLDAP' '--without-_XML' '--without-mcast' '--without-Mailstore' '--without-FNV' '--without-ferite' '--without-AVS' '--with-GeoIP' '--with-bzip2' 'CFLAGS=-O2 -fPIC' --cache-file=/dev/null --srcdir=/build/buildd3/pexts-0.2.0/src
Main source directory
checking for gcc... /build/buildd3/pexts-0.2.0/tools/smartlink gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /build/buildd3/pexts-0.2.0/tools/smartlink gcc accepts -g... yes
checking for /build/buildd3/pexts-0.2.0/tools/smartlink gcc option to accept ISO C89... none needed
checking for a BSD-compatible install... /usr/bin/ginstall -c
configure: creating ./config.status
config.status: creating Makefile
config.status: creating Makefile.rules
=== configuring in AdminTools (/build/buildd3/pexts-0.2.0/src/AdminTools)
configure: running /bin/sh ./configure '--prefix=/usr' '--with-pike=/usr/bin/pike7.6' '--without-_esmtp' '--without-_FDF' '--without-PDF' '--without-_BerkeleyDB' '--without-Newt' '--without-gpgme' '--without-mnoGo' '--without-OpenSSL' '--without-OpenLDAP' '--without-_XML' '--without-mcast' '--without-Mailstore' '--without-FNV' '--without-ferite' '--without-AVS' '--with-GeoIP' '--with-bzip2' 'CFLAGS=-O2 -fPIC' 'CC=/build/buildd3/pexts-0.2.0/tools/smartlink gcc' 'LDFLAGS= -R/usr/lib -L/usr/lib -R/usr/local/lib -L/usr/local/lib -R/usr/X11R6/lib -L/usr/X11R6/lib' 'CPPFLAGS=-I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include' --cache-file=/dev/null --srcdir=.
AdminTools
checking for gcc... /build/buildd3/pexts-0.2.0/tools/smartlink gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /build/buildd3/pexts-0.2.0/tools/smartlink gcc accepts -g... yes
checking for /build/buildd3/pexts-0.2.0/tools/smartlink gcc option to accept ISO C89... none needed
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking for the Pike Extension Package base directory... found
checking how to run the C preprocessor... /build/buildd3/pexts-0.2.0/tools/smartlink gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking shadow.h usability... yes
checking shadow.h presence... yes
checking for shadow.h... yes
checking dirent.h usability... yes
checking dirent.h presence... yes
checking for dirent.h... yes
checking sys/quota.h usability... yes
checking sys/quota.h presence... yes
checking for sys/quota.h... yes
checking mntent.h usability... yes
checking mntent.h presence... yes
checking for mntent.h... yes
checking security/pam_appl.h usability... yes
checking security/pam_appl.h presence... yes
checking for security/pam_appl.h... yes
checking for getspent... yes
checking for getspent_r... yes
checking for getspnam... yes
checking for getspnam_r... yes
checking for opendir... yes
checking for closedir... yes
checking for readdir... yes
checking for readdir_r... yes
checking for rewinddir... yes
checking for seekdir... yes
checking for telldir... yes
checking for scandir... yes
checking for alphasort... yes
checking for versionsort... yes
checking for sysconf... yes
checking for setspent... yes
checking for endspent... yes
checking for quotactl... yes
checking for hasmntopt... yes
checking for getmntent... yes
checking for setmntent... yes
checking for mkstemp... yes
checking for mkdtemp... yes
checking for pam_start in -lpam... yes
checking for pam_authenticate... yes
checking for pam_chauthtok... yes
checking for pam_end... yes
checking for pam_start... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for working (and failsafe) strerror... yes
checking for struct dirent with d_type... yes
checking for struct dirent with d_off... yes
checking if getspnam_r takes 4 (Solaris) or 5 (Linux) arguments... 5 - Linux
checking if getsent_r takes 3 (Solaris) or 4 (Linux) arguments... 4 - Linux
checking for known quotactl interface... Linux
configure: creating ./config.status
config.status: creating Makefile
config.status: creating at_config.h
=== configuring in Curses (/build/buildd3/pexts-0.2.0/src/Curses)
configure: running /bin/sh ./configure '--prefix=/usr' '--with-pike=/usr/bin/pike7.6' '--without-_esmtp' '--without-_FDF' '--without-PDF' '--without-_BerkeleyDB' '--without-Newt' '--without-gpgme' '--without-mnoGo' '--without-OpenSSL' '--without-OpenLDAP' '--without-_XML' '--without-mcast' '--without-Mailstore' '--without-FNV' '--without-ferite' '--without-AVS' '--with-GeoIP' '--with-bzip2' 'CFLAGS=-O2 -fPIC' 'CC=/build/buildd3/pexts-0.2.0/tools/smartlink gcc' 'LDFLAGS= -R/usr/lib -L/usr/lib -R/usr/local/lib -L/usr/local/lib -R/usr/X11R6/lib -L/usr/X11R6/lib' 'CPPFLAGS=-I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include' --cache-file=/dev/null --srcdir=.
Curses
checking for gcc... /build/buildd3/pexts-0.2.0/tools/smartlink gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /build/buildd3/pexts-0.2.0/tools/smartlink gcc accepts -g... yes
checking for /build/buildd3/pexts-0.2.0/tools/smartlink gcc option to accept ISO C89... none needed
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking for the Pike Extension Package base directory... found
checking how to run the C preprocessor... /build/buildd3/pexts-0.2.0/tools/smartlink gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking curses.h usability... yes
checking curses.h presence... yes
checking for curses.h... yes
checking for initscr in -lcurses... yes
checking for curses.h... (cached) yes
checking ncurses.h usability... yes
checking ncurses.h presence... yes
checking for ncurses.h... yes
checking ncurses/curses.h usability... no
checking ncurses/curses.h presence... no
checking for ncurses/curses.h... no
checking ncurses/ncurses.h usability... no
checking ncurses/ncurses.h presence... no
checking for ncurses/ncurses.h... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating curses_config.h
=== configuring in GeoIP (/build/buildd3/pexts-0.2.0/src/GeoIP)
configure: running /bin/sh ./configure '--prefix=/usr' '--with-pike=/usr/bin/pike7.6' '--without-_esmtp' '--without-_FDF' '--without-PDF' '--without-_BerkeleyDB' '--without-Newt' '--without-gpgme' '--without-mnoGo' '--without-OpenSSL' '--without-OpenLDAP' '--without-_XML' '--without-mcast' '--without-Mailstore' '--without-FNV' '--without-ferite' '--without-AVS' '--with-GeoIP' '--with-bzip2' 'CFLAGS=-O2 -fPIC' 'CC=/build/buildd3/pexts-0.2.0/tools/smartlink gcc' 'LDFLAGS= -R/usr/lib -L/usr/lib -R/usr/local/lib -L/usr/local/lib -R/usr/X11R6/lib -L/usr/X11R6/lib' 'CPPFLAGS=-I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include' --cache-file=/dev/null --srcdir=.
GeoIP
checking for gcc... /build/buildd3/pexts-0.2.0/tools/smartlink gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /build/buildd3/pexts-0.2.0/tools/smartlink gcc accepts -g... yes
checking for /build/buildd3/pexts-0.2.0/tools/smartlink gcc option to accept ISO C89... none needed
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking for the Pike Extension Package base directory... found
checking for GeoIP_country_code_by_name in -lGeoIP... yes
checking for GeoIP_new... yes
checking how to run the C preprocessor... /build/buildd3/pexts-0.2.0/tools/smartlink gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking GeoIP.h usability... yes
checking GeoIP.h presence... yes
checking for GeoIP.h... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating geoip_config.h
=== configuring in Mhash (/build/buildd3/pexts-0.2.0/src/Mhash)
configure: running /bin/sh ./configure '--prefix=/usr' '--with-pike=/usr/bin/pike7.6' '--without-_esmtp' '--without-_FDF' '--without-PDF' '--without-_BerkeleyDB' '--without-Newt' '--without-gpgme' '--without-mnoGo' '--without-OpenSSL' '--without-OpenLDAP' '--without-_XML' '--without-mcast' '--without-Mailstore' '--without-FNV' '--without-ferite' '--without-AVS' '--with-GeoIP' '--with-bzip2' 'CFLAGS=-O2 -fPIC' 'CC=/build/buildd3/pexts-0.2.0/tools/smartlink gcc' 'LDFLAGS= -R/usr/lib -L/usr/lib -R/usr/local/lib -L/usr/local/lib -R/usr/X11R6/lib -L/usr/X11R6/lib' 'CPPFLAGS=-I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include' --cache-file=/dev/null --srcdir=.
Mhash
checking for gcc... /build/buildd3/pexts-0.2.0/tools/smartlink gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /build/buildd3/pexts-0.2.0/tools/smartlink gcc accepts -g... yes
checking for /build/buildd3/pexts-0.2.0/tools/smartlink gcc option to accept ISO C89... none needed
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking for the Pike Extension Package base directory... found
checking how to run the C preprocessor... /build/buildd3/pexts-0.2.0/tools/smartlink gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking mhash.h usability... yes
checking mhash.h presence... yes
checking for mhash.h... yes
checking for mhash in -lmhash... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating mhash_config.h
=== configuring in PCRE (/build/buildd3/pexts-0.2.0/src/PCRE)
configure: running /bin/sh ./configure '--prefix=/usr' '--with-pike=/usr/bin/pike7.6' '--without-_esmtp' '--without-_FDF' '--without-PDF' '--without-_BerkeleyDB' '--without-Newt' '--without-gpgme' '--without-mnoGo' '--without-OpenSSL' '--without-OpenLDAP' '--without-_XML' '--without-mcast' '--without-Mailstore' '--without-FNV' '--without-ferite' '--without-AVS' '--with-GeoIP' '--with-bzip2' 'CFLAGS=-O2 -fPIC' 'CC=/build/buildd3/pexts-0.2.0/tools/smartlink gcc' 'LDFLAGS= -R/usr/lib -L/usr/lib -R/usr/local/lib -L/usr/local/lib -R/usr/X11R6/lib -L/usr/X11R6/lib' 'CPPFLAGS=-I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include' --cache-file=/dev/null --srcdir=.
PCRE
checking for gcc... /build/buildd3/pexts-0.2.0/tools/smartlink gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /build/buildd3/pexts-0.2.0/tools/smartlink gcc accepts -g... yes
checking for /build/buildd3/pexts-0.2.0/tools/smartlink gcc option to accept ISO C89... none needed
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking for the Pike Extension Package base directory... found
checking how to run the C preprocessor... /build/buildd3/pexts-0.2.0/tools/smartlink gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking pcre.h usability... yes
checking pcre.h presence... yes
checking for pcre.h... yes
checking for setlocale... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating pcre_config.h
=== configuring in _Newt (/build/buildd3/pexts-0.2.0/src/_Newt)
configure: running /bin/sh ./configure '--prefix=/usr' '--with-pike=/usr/bin/pike7.6' '--without-_esmtp' '--without-_FDF' '--without-PDF' '--without-_BerkeleyDB' '--without-Newt' '--without-gpgme' '--without-mnoGo' '--without-OpenSSL' '--without-OpenLDAP' '--without-_XML' '--without-mcast' '--without-Mailstore' '--without-FNV' '--without-ferite' '--without-AVS' '--with-GeoIP' '--with-bzip2' 'CFLAGS=-O2 -fPIC' 'CC=/build/buildd3/pexts-0.2.0/tools/smartlink gcc' 'LDFLAGS= -R/usr/lib -L/usr/lib -R/usr/local/lib -L/usr/local/lib -R/usr/X11R6/lib -L/usr/X11R6/lib' 'CPPFLAGS=-I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include' --cache-file=/dev/null --srcdir=.
Newt (new)
checking for gcc... /build/buildd3/pexts-0.2.0/tools/smartlink gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /build/buildd3/pexts-0.2.0/tools/smartlink gcc accepts -g... yes
checking for /build/buildd3/pexts-0.2.0/tools/smartlink gcc option to accept ISO C89... none needed
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking for the Pike Extension Package base directory... found
checking how to run the C preprocessor... /build/buildd3/pexts-0.2.0/tools/smartlink gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking newt.h usability... yes
checking newt.h presence... yes
checking for newt.h... yes
checking for newtInit in -lnewt... yes
checking for newtCursorOn... yes
checking for newtCursorOff... yes
checking for newtListitem... no
checking for newtListitemSet... no
checking for newtListitemGetData... no
checking for newtCheckboxTreeSetEntry... yes
checking for newtCheckboxTreeGetEntryValue... yes
checking for newtCheckboxTreeSetEntryValue... yes
checking for newtSetThreeD... no
checking for newtFormSetTimer... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating newt_config.h
=== configuring in _XSLT (/build/buildd3/pexts-0.2.0/src/_XSLT)
configure: running /bin/sh ./configure '--prefix=/usr' '--with-pike=/usr/bin/pike7.6' '--without-_esmtp' '--without-_FDF' '--without-PDF' '--without-_BerkeleyDB' '--without-Newt' '--without-gpgme' '--without-mnoGo' '--without-OpenSSL' '--without-OpenLDAP' '--without-_XML' '--without-mcast' '--without-Mailstore' '--without-FNV' '--without-ferite' '--without-AVS' '--with-GeoIP' '--with-bzip2' 'CFLAGS=-O2 -fPIC' 'CC=/build/buildd3/pexts-0.2.0/tools/smartlink gcc' 'LDFLAGS= -R/usr/lib -L/usr/lib -R/usr/local/lib -L/usr/local/lib -R/usr/X11R6/lib -L/usr/X11R6/lib' 'CPPFLAGS=-I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include' --cache-file=/dev/null --srcdir=.
_XSLT
checking for gcc... /build/buildd3/pexts-0.2.0/tools/smartlink gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /build/buildd3/pexts-0.2.0/tools/smartlink gcc accepts -g... yes
checking for /build/buildd3/pexts-0.2.0/tools/smartlink gcc option to accept ISO C89... none needed
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking for the Pike Extension Package base directory... found
checking for xml2-config... /usr/bin/xml2-config
checking for libxml - version >= 2.5.1... yes (version 2.6.28)
checking for xslt-config... none
checking for the libxslt1 libs... not found
configure: creating ./config.status
config.status: creating Makefile
config.status: creating xslt_config.h
=== configuring in bzip2 (/build/buildd3/pexts-0.2.0/src/bzip2)
configure: running /bin/sh ./configure '--prefix=/usr' '--with-pike=/usr/bin/pike7.6' '--without-_esmtp' '--without-_FDF' '--without-PDF' '--without-_BerkeleyDB' '--without-Newt' '--without-gpgme' '--without-mnoGo' '--without-OpenSSL' '--without-OpenLDAP' '--without-_XML' '--without-mcast' '--without-Mailstore' '--without-FNV' '--without-ferite' '--without-AVS' '--with-GeoIP' '--with-bzip2' 'CFLAGS=-O2 -fPIC' 'CC=/build/buildd3/pexts-0.2.0/tools/smartlink gcc' 'LDFLAGS= -R/usr/lib -L/usr/lib -R/usr/local/lib -L/usr/local/lib -R/usr/X11R6/lib -L/usr/X11R6/lib' 'CPPFLAGS=-I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include' --cache-file=/dev/null --srcdir=.
bzip2
checking for gcc... /build/buildd3/pexts-0.2.0/tools/smartlink gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /build/buildd3/pexts-0.2.0/tools/smartlink gcc accepts -g... yes
checking for /build/buildd3/pexts-0.2.0/tools/smartlink gcc option to accept ISO C89... none needed
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking for the Pike Extension Package base directory... found
checking for BZ2_bzCompressInit in -lbz2... yes
checking how to run the C preprocessor... /build/buildd3/pexts-0.2.0/tools/smartlink gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking bzlib.h usability... yes
checking bzlib.h presence... yes
checking for bzlib.h... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating bz2_config.h
=== configuring in mcrypt (/build/buildd3/pexts-0.2.0/src/mcrypt)
configure: running /bin/sh ./configure '--prefix=/usr' '--with-pike=/usr/bin/pike7.6' '--without-_esmtp' '--without-_FDF' '--without-PDF' '--without-_BerkeleyDB' '--without-Newt' '--without-gpgme' '--without-mnoGo' '--without-OpenSSL' '--without-OpenLDAP' '--without-_XML' '--without-mcast' '--without-Mailstore' '--without-FNV' '--without-ferite' '--without-AVS' '--with-GeoIP' '--with-bzip2' 'CFLAGS=-O2 -fPIC' 'CC=/build/buildd3/pexts-0.2.0/tools/smartlink gcc' 'LDFLAGS= -R/usr/lib -L/usr/lib -R/usr/local/lib -L/usr/local/lib -R/usr/X11R6/lib -L/usr/X11R6/lib' 'CPPFLAGS=-I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include' --cache-file=/dev/null --srcdir=.
mcrypt
checking for gcc... /build/buildd3/pexts-0.2.0/tools/smartlink gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /build/buildd3/pexts-0.2.0/tools/smartlink gcc accepts -g... yes
checking for /build/buildd3/pexts-0.2.0/tools/smartlink gcc option to accept ISO C89... none needed
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking for the Pike Extension Package base directory... found
checking for libmcrypt-config... /usr/bin/libmcrypt-config
checking for libmcrypt - version >= 2.4.15... yes
configure: creating ./config.status
config.status: creating Makefile
The Pike Extension module package is now configured. This is some
information about the build environment. If the wrong pike was
selected, try re-running configure with
'--with-pike=/path/to/correct/pike'.
CC: /build/buildd3/pexts-0.2.0/tools/smartlink gcc
LDSHARED: /build/buildd3/pexts-0.2.0/tools/smartlink gcc -shared
CFLAGS: -O2 -fPIC -fpic
CPPFLAGS: -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include
LDFLAGS: -R/usr/lib -L/usr/lib -R/usr/local/lib -L/usr/local/lib -R/usr/X11R6/lib -L/usr/X11R6/lib
Pike binary used: /usr/bin/pike7.6
Pike version: 7.6.93
Pike include dir: -I/usr/include/pike/7.6.93
Pike module dir: /usr/lib/pike/7.6.93/lib/modules
Enabled modules:
AdminTools
Curses
GeoIP
Mhash
PCRE
_Newt
_XSLT
bzip2
mcrypt
make[1]: Leaving directory `/build/buildd3/pexts-0.2.0'
touch configure-stamp-76
/usr/bin/make -fdebian/rules PVER=7.6 do-build
make[1]: Entering directory `/build/buildd3/pexts-0.2.0'
dh_testdir
# Add here commands to compile the package.
/usr/bin/make
make[2]: Entering directory `/build/buildd3/pexts-0.2.0'
make[3]: Entering directory `/build/buildd3/pexts-0.2.0/src'
Making AdminTools
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/AdminTools'
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./AdminTools/ -I. -c atmain.c -o atmain.o
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./AdminTools/ -I. -c at_common.c -o at_common.o
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./AdminTools/ -I. -c at_shadow.c -o at_shadow.o
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./AdminTools/ -I. -c at_directory.c -o at_directory.o
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./AdminTools/ -I. -c at_quota.c -o at_quota.o
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./AdminTools/ -I. -c at_system.c -o at_system.o
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./AdminTools/ -I. -c at_pam.c -o at_pam.o
linking AdminTools
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/AdminTools'
Making Curses
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/Curses'
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./Curses/ -I. -c curses.c -o curses.o
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./Curses/ -I. -c window.c -o window.o
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./Curses/ -I. -c screen.c -o screen.o
linking Curses
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/Curses'
Making GeoIP
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/GeoIP'
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -O2 -fPIC -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./GeoIP/ -I. -c geoip_main.c -o geoip_main.o
linking GeoIP
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/GeoIP'
Making Mhash
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/Mhash'
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./Mhash/ -I. -c mhash.c -o mhash.o
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./Mhash/ -I. -c hmac.c -o hmac.o
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./Mhash/ -I. -c global.c -o global.o
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./Mhash/ -I. -c main.c -o main.o
linking Mhash
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/Mhash'
Making PCRE
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/PCRE'
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./PCRE/ -I. -c pcre.c -o pcre.o
linking PCRE
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/PCRE'
Making _Newt
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/_Newt'
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./_Newt/ -I. -c main.c -o main.o
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./_Newt/ -I. -c functions.c -o functions.o
functions.c: In function 'f_listboxGetSelection':
functions.c:1645: warning: assignment from incompatible pointer type
functions.c: In function 'f_checkboxTreeGetSelection':
functions.c:1838: warning: assignment from incompatible pointer type
functions.c: In function 'f_checkboxTreeGetCurrent':
functions.c:1867: warning: assignment makes integer from pointer without a cast
functions.c: In function 'f_checkboxTreeGetMultiSelection':
functions.c:1909: warning: assignment from incompatible pointer type
functions.c: In function 'f_entry':
functions.c:2943: warning: passing argument 5 of 'newtEntry' from incompatible pointer type
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./_Newt/ -I. -c component_base.c -o component_base.o
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./_Newt/ -I. -c dictionary.c -o dictionary.o
linking _Newt
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/_Newt'
Making _XSLT
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/_XSLT'
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/usr/include/libxml2 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./_XSLT/ -I. -c xslt.c -o xslt.o
linking _XSLT
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/_XSLT'
Making bzip2
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/bzip2'
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./bzip2/ -I. -c bz2main.c -o bz2main.o
linking bzip2
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/bzip2'
Making mcrypt
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/mcrypt'
/build/buildd3/pexts-0.2.0/tools/smartlink gcc -I/usr/include/pike/7.6.93 -O2 -fPIC -DHAVE_LIBMCRYPT -I/usr/include -I/build/buildd3/pexts-0.2.0/src/ -I/usr/include -I/usr/local/include -I/usr/X11R6/include -O2 -fPIC -I./mcrypt/ -I. -c mcrypt.c -o mcrypt.o
linking mcrypt
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/mcrypt'
make[3]: Leaving directory `/build/buildd3/pexts-0.2.0/src'
make[2]: Leaving directory `/build/buildd3/pexts-0.2.0'
touch build-stamp
make[1]: Leaving directory `/build/buildd3/pexts-0.2.0'
/usr/bin/make -fdebian/rules PVER=7.6 inter-install
make[1]: Entering directory `/build/buildd3/pexts-0.2.0'
dh_testdir
dh_clean -k
dh_installdirs -A
install -d -m 755 /build/buildd3/pexts-0.2.0/debian/pike/usr/lib/pike/7.6.93/lib/modules
/usr/bin/make install DESTDIR=/build/buildd3/pexts-0.2.0/debian/pike/
make[2]: Entering directory `/build/buildd3/pexts-0.2.0'
make[3]: Entering directory `/build/buildd3/pexts-0.2.0/src'
Making AdminTools
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/AdminTools'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/AdminTools'
Making Curses
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/Curses'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/Curses'
Making GeoIP
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/GeoIP'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/GeoIP'
Making Mhash
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/Mhash'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/Mhash'
Making PCRE
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/PCRE'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/PCRE'
Making _Newt
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/_Newt'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/_Newt'
Making _XSLT
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/_XSLT'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/_XSLT'
Making bzip2
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/bzip2'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/bzip2'
Making mcrypt
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/mcrypt'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/mcrypt'
make[3]: Leaving directory `/build/buildd3/pexts-0.2.0/src'
make[3]: Entering directory `/build/buildd3/pexts-0.2.0/src'
for a in AdminTools Curses GeoIP Mhash PCRE _Newt _XSLT bzip2 mcrypt ; do \
( cd $a && /usr/bin/make DESTDIR="/build/buildd3/pexts-0.2.0/debian/pike/" MODNAME=$a install ) ; \
done
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/AdminTools'
/usr/bin/ginstall -c AdminTools.so /build/buildd3/pexts-0.2.0/debian/pike//usr/lib/pike/7.6.93/lib/modules
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/AdminTools'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/Curses'
/usr/bin/ginstall -c Curses.so /build/buildd3/pexts-0.2.0/debian/pike//usr/lib/pike/7.6.93/lib/modules
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/Curses'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/GeoIP'
/usr/bin/ginstall -c GeoIP.so /build/buildd3/pexts-0.2.0/debian/pike//usr/lib/pike/7.6.93/lib/modules
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/GeoIP'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/Mhash'
/usr/bin/ginstall -c Mhash.so /build/buildd3/pexts-0.2.0/debian/pike//usr/lib/pike/7.6.93/lib/modules
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/Mhash'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/PCRE'
/usr/bin/ginstall -c PCRE.so /build/buildd3/pexts-0.2.0/debian/pike//usr/lib/pike/7.6.93/lib/modules
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/PCRE'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/_Newt'
/usr/bin/ginstall -c _Newt.so /build/buildd3/pexts-0.2.0/debian/pike//usr/lib/pike/7.6.93/lib/modules
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/_Newt'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/_XSLT'
/usr/bin/ginstall -c _XSLT.so /build/buildd3/pexts-0.2.0/debian/pike//usr/lib/pike/7.6.93/lib/modules
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/_XSLT'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/bzip2'
/usr/bin/ginstall -c bzip2.so /build/buildd3/pexts-0.2.0/debian/pike//usr/lib/pike/7.6.93/lib/modules
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/bzip2'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/mcrypt'
/usr/bin/ginstall -c mcrypt.so /build/buildd3/pexts-0.2.0/debian/pike//usr/lib/pike/7.6.93/lib/modules
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/mcrypt'
make[3]: Leaving directory `/build/buildd3/pexts-0.2.0/src'
Pike Extension modules installed.
make[2]: Leaving directory `/build/buildd3/pexts-0.2.0'
install -d -m 755 /build/buildd3/pexts-0.2.0/debian/pike/usr/lib/pike/7.6.93/lib/modules/Newt.pmod/
cp -pr pmod/Newt.pmod/* /build/buildd3/pexts-0.2.0/debian/pike/usr/lib/pike/7.6.93/lib/modules/Newt.pmod/
make[1]: Leaving directory `/build/buildd3/pexts-0.2.0'
/usr/bin/make -fdebian/rules PVER=7.6 inter-clean
make[1]: Entering directory `/build/buildd3/pexts-0.2.0'
/usr/bin/make spotless
make[2]: Entering directory `/build/buildd3/pexts-0.2.0'
rm -f config.h
make[3]: Entering directory `/build/buildd3/pexts-0.2.0/src'
for a in AdminTools Curses GeoIP Mhash PCRE _Newt _XSLT bzip2 mcrypt ; do \
( cd $a && /usr/bin/make MODNAME=$a clean ) ; \
done
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/AdminTools'
rm -f *.o *~ AdminTools.so
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/AdminTools'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/Curses'
rm -f *.o *~ Curses.so
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/Curses'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/GeoIP'
rm -f *.o *~ GeoIP.so
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/GeoIP'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/Mhash'
rm -f *.o *~ Mhash.so
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/Mhash'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/PCRE'
rm -f *.o *~ PCRE.so
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/PCRE'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/_Newt'
rm -f *.o *~ _Newt.so
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/_Newt'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/_XSLT'
rm -f *.o *~ _XSLT.so
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/_XSLT'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/bzip2'
rm -f *.o *~ bzip2.so
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/bzip2'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/mcrypt'
rm -f *.o *~ mcrypt.so
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/mcrypt'
make[3]: Leaving directory `/build/buildd3/pexts-0.2.0/src'
make[3]: Entering directory `/build/buildd3/pexts-0.2.0/src'
for a in AdminTools Curses GeoIP Mhash PCRE _Newt _XSLT bzip2 mcrypt; do ( cd $a && /usr/bin/make spotless); done
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/AdminTools'
rm -f *.o *~ AdminTools.so
rm -f config.* ./AdminTools//Makefile Makefile.pre
rm -f at_config.h at_config.h.in AdminTools.so
rm -f ./AdminTools//configure
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/AdminTools'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/Curses'
rm -f *.o *~ Curses.so
rm -f config.* ./Curses//Makefile Makefile.pre
rm -f curses_config.h curses_config.h.in Curses.so
rm -f ./Curses//configure
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/Curses'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/GeoIP'
rm -f *.o *~ GeoIP.so
rm -f config.* ./GeoIP//Makefile Makefile.pre
rm -f geoip_config.h geoip_config.h.in GeoIP.so
rm -f ./GeoIP//configure
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/GeoIP'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/Mhash'
rm -f *.o *~ Mhash.so
rm -f config.* ./Mhash//Makefile Makefile.pre
rm -f mhash_config.h mhash_config.h.in Mhash.so
rm -f ./Mhash//configure
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/Mhash'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/PCRE'
rm -f *.o *~ PCRE.so
rm -f config.* ./PCRE//Makefile Makefile.pre
rm -f pcre_config.h pcre_config.h.in PCRE.so
rm -f ./PCRE//configure
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/PCRE'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/_Newt'
rm -f *.o *~ _Newt.so
rm -f config.* ./_Newt//Makefile Makefile.pre
rm -f newt_config.h newt_config.h.in _Newt.so test test.log Newt.log Newt.pmod
rm -f ./_Newt//configure
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/_Newt'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/_XSLT'
rm -f *.o *~ _XSLT.so
rm -f config.* ./_XSLT//Makefile Makefile.pre
rm -f xslt_config.h _XSLT.so
rm -f ./_XSLT//configure
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/_XSLT'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/bzip2'
rm -f *.o *~ bzip2.so
rm -f config.* ./bzip2//Makefile Makefile.pre
rm -f bz2_config.h bz2_config.h.in bzip2.so
rm -f ./bzip2//configure
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/bzip2'
make[4]: Entering directory `/build/buildd3/pexts-0.2.0/src/mcrypt'
rm -f *.o *~ mcrypt.so
rm -f config.* ./mcrypt//Makefile Makefile.pre
rm -f conf.libmcrypttest
rm -f ./mcrypt//configure
make[4]: Leaving directory `/build/buildd3/pexts-0.2.0/src/mcrypt'
rm -f Makefile config.log config.status Makefile.rules .module_dirs
make[3]: Leaving directory `/build/buildd3/pexts-0.2.0/src'
rm -f Makefile
rm -f config.h.in configure.ac src/configure.ac
rm -f .module_dirs
find . '(' -name '#*#' -o -name '*~' -o -name '.*~' -o -name '*.bak'\
-o -name '.pine-debug*' -o -name '.*.bak' -o -name core -o -name \
config.cache -o -name config.status -o -name config.log -o -name \
"*.a" -o -name configure ')' -print -exec /bin/rm '{}' ';'
./src/AVS/configure
./src/AdminTools/configure
./src/Curses/configure
./src/GeoIP/configure
./src/Gzip/configure
./src/Magic/configure
./src/Mailstore/libmutt/configure
./src/Mailstore/configure
./src/Mhash/configure
./src/OpenLDAP/configure
./src/OpenSSL/configure
./src/PCRE/pcrelib/configure
./src/PCRE/configure
./src/PDF/configure
./src/_FDF/configure
./src/_Newt/configure
./src/_XML/configure
./src/_XSLT/configure
./src/bzip2/configure
./src/mcast/configure
./src/mcrypt/configure
./src/mnoGo/configure
./src/configure
./config.log
./config.status
./configure
find . -name 'autom4te.cache' -print | xargs /bin/rm -rf
make[2]: Leaving directory `/build/buildd3/pexts-0.2.0'
rm -f src/PCRE/pcrelib/dftables
rm -f `find -name ".cvsignore" -type f -print`
rm -rf `find -name "CVS" -type d -print`
rm -f smartlink statuslock
dh_clean
make[1]: Leaving directory `/build/buildd3/pexts-0.2.0'
touch build-stamp-76
/usr/bin/fakeroot debian/rules binary-arch
if [ ! -f patched-stamp ]; then \
for f in /build/buildd3/pexts-0.2.0/debian/patches/*.diff; do \
patch -p1 -f --no-backup-if-mismatch -d /build/buildd3/pexts-0.2.0 < $f ; \
done ; \
fi
touch patched-stamp
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs -A
dh_movefiles --sourcedir=debian/pike/
# Need this version of debhelper for DH_OPTIONS to work.
dh_testdir
dh_testroot
dh_installdocs
dh_installexamples
dh_installchangelogs
dh_strip
dh_link
dh_compress
dh_fixperms
# You may want to make some executables suid here.
dh_installdeb
dh_shlibdeps
dh_gencontrol -- -Vpikever76=7.6.93
dh_md5sums
dh_builddeb
dpkg-deb: building package `pike7.6-pexts-admintools' in `../pike7.6-pexts-admintools_0.2.0-8_m32r.deb'.
dpkg-deb: building package `pike7.6-pexts-curses' in `../pike7.6-pexts-curses_0.2.0-8_m32r.deb'.
dpkg-deb: building package `pike7.6-pexts-mhash' in `../pike7.6-pexts-mhash_0.2.0-8_m32r.deb'.
dpkg-deb: building package `pike7.6-pexts-newt' in `../pike7.6-pexts-newt_0.2.0-8_m32r.deb'.
dpkg-deb: building package `pike7.6-pexts-pcre' in `../pike7.6-pexts-pcre_0.2.0-8_m32r.deb'.
dpkg-deb: building package `pike7.6-pexts-bzip2' in `../pike7.6-pexts-bzip2_0.2.0-8_m32r.deb'.
dpkg-deb: building package `pike7.6-pexts-geoip' in `../pike7.6-pexts-geoip_0.2.0-8_m32r.deb'.
dpkg-deb: building package `pike7.6-pexts-mcrypt' in `../pike7.6-pexts-mcrypt_0.2.0-8_m32r.deb'.
dpkg-genchanges -B
dpkg-genchanges: arch-specific upload - not including arch-independent packages
dpkg-genchanges: binary-only upload - not including any source code
dpkg-buildpackage: binary only upload (no source included)
******************************************************************************
Build finished at 20070614-0033
pexts_0.2.0-8_m32r.changes:
Format: 1.7
Date: Fri, 16 Mar 2007 12:24:45 +0100
Source: pexts
Binary: pike7.6-pexts-geoip pike7.6-pexts-admintools pike7.6-pexts-newt pike7.6-pexts-bzip2 pike7.6-pexts-pcre pike7.6-pexts-mhash pike7.6-pexts-curses pike7.6-pexts-mcrypt
Architecture: m32r
Version: 0.2.0-8
Distribution: unstable
Urgency: low
Maintainer: Debian QA Group <packages at qa.debian.org>
Changed-By: Michael Ablassmeier <abi at debian.org>
Description:
pike7.6-pexts-admintools - Pike AdminTools module
pike7.6-pexts-bzip2 - Pike bzip2 module
pike7.6-pexts-curses - Pike (N)Curses module
pike7.6-pexts-geoip - Pike GeoIP module
pike7.6-pexts-mcrypt - Pike mcrypt module
pike7.6-pexts-mhash - Pike Mhash module
pike7.6-pexts-newt - Pike Newt module
pike7.6-pexts-pcre - Pike PCRE module
Closes: 376563
Changes:
pexts (0.2.0-8) unstable; urgency=low
.
* QA upload. (ACK NMU; Closes: #376563)
* Set maintainer to QA Group; Orphaned: #411678
Files:
212509f5355fbc82a0d43eb56cac4d26 20342 interpreters optional pike7.6-pexts-admintools_0.2.0-8_m32r.deb
b28cb88532912c2891d94dfda7a11280 16808 interpreters optional pike7.6-pexts-curses_0.2.0-8_m32r.deb
5543500e29f83c6a78d0fa562d94c6d3 11366 interpreters optional pike7.6-pexts-mhash_0.2.0-8_m32r.deb
1ccf0764001ddd1107d370a0b3199ce9 30618 interpreters optional pike7.6-pexts-newt_0.2.0-8_m32r.deb
cead98103877ffad9579ae8126d1e76c 8544 interpreters optional pike7.6-pexts-pcre_0.2.0-8_m32r.deb
26e23f149cb6df42bb3742c0d3321f72 7932 interpreters optional pike7.6-pexts-bzip2_0.2.0-8_m32r.deb
5669a97f5c7f0921196e792d6b51bed0 8152 interpreters optional pike7.6-pexts-geoip_0.2.0-8_m32r.deb
afe6e8c30cc47965bf85fb5f6bf5437c 11036 interpreters optional pike7.6-pexts-mcrypt_0.2.0-8_m32r.deb
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-admintools_0.2.0-8_m32r.deb:
new debian package, version 2.0.
size 20342 bytes: control archive= 796 bytes.
rm: cannot remove directory `/tmp/dpkgNaYKNP': Directory not empty
rm cleanup failed, code 256
579 bytes, 15 lines control
595 bytes, 7 lines md5sums
Package: pike7.6-pexts-admintools
Source: pexts
Version: 0.2.0-8
Architecture: m32r
Maintainer: Debian QA Group <packages at qa.debian.org>
Installed-Size: 100
Depends: libc6 (>= 2.3.5-1), libpam0g (>= 0.76), pike7.6 (>= 7.6.93-1) | pike7.6 (<= 7.6.93-99)
Section: interpreters
Priority: optional
Description: Pike AdminTools module
Pexts is a collection of Pike extension modules designed
to fill the gaps that are in the standard Pike distribution.
.
This module implements a glue for the more advanced Unix
system interfaces which aren't supported by the core Pike modules.
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-curses_0.2.0-8_m32r.deb:
new debian package, version 2.0.
size 16808 bytes: control archive= 644 bytes.
rm: cannot remove directory `/tmp/dpkgk353fU': Directory not empty
rm cleanup failed, code 256
535 bytes, 15 lines control
244 bytes, 3 lines md5sums
Package: pike7.6-pexts-curses
Source: pexts
Version: 0.2.0-8
Architecture: m32r
Maintainer: Debian QA Group <packages at qa.debian.org>
Installed-Size: 96
Depends: libc6 (>= 2.3.5-1), libncurses5 (>= 5.4-5), pike7.6 (>= 7.6.93-1) | pike7.6 (<= 7.6.93-99)
Section: interpreters
Priority: optional
Description: Pike (N)Curses module
Pexts is a collection of Pike extension modules designed
to fill the gaps that are in the standard Pike distribution.
.
This module implements a glue for the (N)Curses portable
terminal access library.
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-mhash_0.2.0-8_m32r.deb:
new debian package, version 2.0.
size 11366 bytes: control archive= 624 bytes.
rm: cannot remove directory `/tmp/dpkgb8VNim': Directory not empty
rm cleanup failed, code 256
505 bytes, 15 lines control
241 bytes, 3 lines md5sums
Package: pike7.6-pexts-mhash
Source: pexts
Version: 0.2.0-8
Architecture: m32r
Maintainer: Debian QA Group <packages at qa.debian.org>
Installed-Size: 76
Depends: libc6 (>= 2.3.5-1), libmhash2, pike7.6 (>= 7.6.93-1) | pike7.6 (<= 7.6.93-99)
Section: interpreters
Priority: optional
Description: Pike Mhash module
Pexts is a collection of Pike extension modules designed
to fill the gaps that are in the standard Pike distribution.
.
This module implements a glue for the Mhash library of strong
hashes.
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-newt_0.2.0-8_m32r.deb:
new debian package, version 2.0.
size 30618 bytes: control archive= 695 bytes.
rm: cannot remove directory `/tmp/dpkgjZyGP3': Directory not empty
rm cleanup failed, code 256
503 bytes, 15 lines control
413 bytes, 5 lines md5sums
Package: pike7.6-pexts-newt
Source: pexts
Version: 0.2.0-8
Architecture: m32r
Maintainer: Debian QA Group <packages at qa.debian.org>
Installed-Size: 144
Depends: libc6 (>= 2.3.5-1), libnewt0.52, pike7.6 (>= 7.6.93-1) | pike7.6 (<= 7.6.93-99)
Section: interpreters
Priority: optional
Description: Pike Newt module
Pexts is a collection of Pike extension modules designed
to fill the gaps that are in the standard Pike distribution.
.
This module implements a glue for the Newt user interface
library.
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-pcre_0.2.0-8_m32r.deb:
new debian package, version 2.0.
size 8544 bytes: control archive= 646 bytes.
rm: cannot remove directory `/tmp/dpkgIZxCwx': Directory not empty
rm cleanup failed, code 256
530 bytes, 15 lines control
238 bytes, 3 lines md5sums
Package: pike7.6-pexts-pcre
Source: pexts
Version: 0.2.0-8
Architecture: m32r
Maintainer: Debian QA Group <packages at qa.debian.org>
Installed-Size: 64
Depends: libc6 (>= 2.3.5-1), libpcre3 (>= 4.5), pike7.6 (>= 7.6.93-1) | pike7.6 (<= 7.6.93-99)
Section: interpreters
Priority: optional
Description: Pike PCRE module
Pexts is a collection of Pike extension modules designed
to fill the gaps that are in the standard Pike distribution.
.
This module implements a glue for the PCRE - perl compatible
regular expression library.
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-bzip2_0.2.0-8_m32r.deb:
new debian package, version 2.0.
size 7932 bytes: control archive= 624 bytes.
rm: cannot remove directory `/tmp/dpkg4Njkg7': Directory not empty
rm cleanup failed, code 256
501 bytes, 15 lines control
241 bytes, 3 lines md5sums
Package: pike7.6-pexts-bzip2
Source: pexts
Version: 0.2.0-8
Architecture: m32r
Maintainer: Debian QA Group <packages at qa.debian.org>
Installed-Size: 64
Depends: libbz2-1.0, libc6 (>= 2.3.5-1), pike7.6 (>= 7.6.93-1) | pike7.6 (<= 7.6.93-99)
Section: interpreters
Priority: optional
Description: Pike bzip2 module
Pexts is a collection of Pike extension modules designed
to fill the gaps that are in the standard Pike distribution.
.
This module implements a glue for the bzip2 compression
library.
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-geoip_0.2.0-8_m32r.deb:
new debian package, version 2.0.
size 8152 bytes: control archive= 635 bytes.
rm: cannot remove directory `/tmp/dpkgRwkwFC': Directory not empty
rm cleanup failed, code 256
526 bytes, 15 lines control
241 bytes, 3 lines md5sums
Package: pike7.6-pexts-geoip
Source: pexts
Version: 0.2.0-8
Architecture: m32r
Maintainer: Debian QA Group <packages at qa.debian.org>
Installed-Size: 64
Depends: libc6 (>= 2.3.5-1), libgeoip1 (>= 1.3.17), pike7.6 (>= 7.6.93-1) | pike7.6 (<= 7.6.93-99)
Section: interpreters
Priority: optional
Description: Pike GeoIP module
Pexts is a collection of Pike extension modules designed
to fill the gaps that are in the standard Pike distribution.
.
This module implements a glue for the GeoIP IP to country
code lookup library.
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-mcrypt_0.2.0-8_m32r.deb:
new debian package, version 2.0.
size 11036 bytes: control archive= 624 bytes.
rm: cannot remove directory `/tmp/dpkg4AfK1d': Directory not empty
rm cleanup failed, code 256
509 bytes, 15 lines control
244 bytes, 3 lines md5sums
Package: pike7.6-pexts-mcrypt
Source: pexts
Version: 0.2.0-8
Architecture: m32r
Maintainer: Debian QA Group <packages at qa.debian.org>
Installed-Size: 68
Depends: libc6 (>= 2.3.5-1), libmcrypt4, pike7.6 (>= 7.6.93-1) | pike7.6 (<= 7.6.93-99)
Section: interpreters
Priority: optional
Description: Pike mcrypt module
Pexts is a collection of Pike extension modules designed
to fill the gaps that are in the standard Pike distribution.
.
This module implements a glue for the mcrypt library of strong
hashes.
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-admintools_0.2.0-8_m32r.deb:
drwxr-xr-x root/root 0 2007-06-14 00:26 ./
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/lib/
drwxr-xr-x root/root 0 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/
-rw-r--r-- root/root 31380 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/AdminTools.so
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/doc/
drwxr-xr-x root/root 0 2007-06-14 00:26 ./usr/share/doc/pike7.6-pexts-admintools/
-rw-r--r-- root/root 1741 2005-04-22 10:48 ./usr/share/doc/pike7.6-pexts-admintools/README
-rw-r--r-- root/root 52 2005-04-22 10:48 ./usr/share/doc/pike7.6-pexts-admintools/CHANGES
-rw-r--r-- root/root 514 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-admintools/README.Debian
-rw-r--r-- root/root 689 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-admintools/copyright
-rw-r--r-- root/root 1723 2005-04-22 10:48 ./usr/share/doc/pike7.6-pexts-admintools/README.modules.gz
-rw-r--r-- root/root 2198 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-admintools/changelog.Debian.gz
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-curses_0.2.0-8_m32r.deb:
drwxr-xr-x root/root 0 2007-06-14 00:26 ./
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/lib/
drwxr-xr-x root/root 0 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/
-rw-r--r-- root/root 43668 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/Curses.so
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/doc/
drwxr-xr-x root/root 0 2007-06-14 00:26 ./usr/share/doc/pike7.6-pexts-curses/
-rw-r--r-- root/root 689 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-curses/copyright
-rw-r--r-- root/root 2198 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-curses/changelog.Debian.gz
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-mhash_0.2.0-8_m32r.deb:
drwxr-xr-x root/root 0 2007-06-14 00:26 ./
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/lib/
drwxr-xr-x root/root 0 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/
-rw-r--r-- root/root 21148 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/Mhash.so
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/doc/
drwxr-xr-x root/root 0 2007-06-14 00:26 ./usr/share/doc/pike7.6-pexts-mhash/
-rw-r--r-- root/root 689 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-mhash/copyright
-rw-r--r-- root/root 2198 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-mhash/changelog.Debian.gz
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-newt_0.2.0-8_m32r.deb:
drwxr-xr-x root/root 0 2007-06-14 00:26 ./
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/lib/
drwxr-xr-x root/root 0 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/
-rw-r--r-- root/root 69000 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/_Newt.so
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/lib/modules/Newt.pmod/
-rw-r--r-- root/root 7734 2005-04-22 10:48 ./usr/lib/pike/7.6.93/lib/modules/Newt.pmod/module.pmod
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/doc/
drwxr-xr-x root/root 0 2007-06-14 00:26 ./usr/share/doc/pike7.6-pexts-newt/
-rw-r--r-- root/root 689 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-newt/copyright
drwxr-xr-x root/root 0 2007-06-14 00:25 ./usr/share/doc/pike7.6-pexts-newt/examples/
-rwxr-xr-x root/root 909 2005-04-22 10:48 ./usr/share/doc/pike7.6-pexts-newt/examples/test.pike
-rw-r--r-- root/root 2198 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-newt/changelog.Debian.gz
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-pcre_0.2.0-8_m32r.deb:
drwxr-xr-x root/root 0 2007-06-14 00:26 ./
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/lib/
drwxr-xr-x root/root 0 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/
-rw-r--r-- root/root 10296 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/PCRE.so
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/doc/
drwxr-xr-x root/root 0 2007-06-14 00:26 ./usr/share/doc/pike7.6-pexts-pcre/
-rw-r--r-- root/root 689 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-pcre/copyright
-rw-r--r-- root/root 2198 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-pcre/changelog.Debian.gz
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-bzip2_0.2.0-8_m32r.deb:
drwxr-xr-x root/root 0 2007-06-14 00:26 ./
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/lib/
drwxr-xr-x root/root 0 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/
-rw-r--r-- root/root 9544 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/bzip2.so
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/doc/
drwxr-xr-x root/root 0 2007-06-14 00:26 ./usr/share/doc/pike7.6-pexts-bzip2/
-rw-r--r-- root/root 689 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-bzip2/copyright
-rw-r--r-- root/root 2198 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-bzip2/changelog.Debian.gz
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-geoip_0.2.0-8_m32r.deb:
drwxr-xr-x root/root 0 2007-06-14 00:26 ./
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/lib/
drwxr-xr-x root/root 0 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/
-rw-r--r-- root/root 11288 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/GeoIP.so
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/doc/
drwxr-xr-x root/root 0 2007-06-14 00:26 ./usr/share/doc/pike7.6-pexts-geoip/
-rw-r--r-- root/root 689 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-geoip/copyright
-rw-r--r-- root/root 2198 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-geoip/changelog.Debian.gz
/debian/buildd3/build/chroot-unstable/build/buildd3/pike7.6-pexts-mcrypt_0.2.0-8_m32r.deb:
drwxr-xr-x root/root 0 2007-06-14 00:26 ./
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/lib/pike/7.6.93/lib/
drwxr-xr-x root/root 0 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/
-rw-r--r-- root/root 15848 2007-06-14 00:25 ./usr/lib/pike/7.6.93/lib/modules/mcrypt.so
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/
drwxr-xr-x root/root 0 2007-06-14 00:24 ./usr/share/doc/
drwxr-xr-x root/root 0 2007-06-14 00:26 ./usr/share/doc/pike7.6-pexts-mcrypt/
-rw-r--r-- root/root 689 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-mcrypt/copyright
-rw-r--r-- root/root 2198 2007-06-13 22:36 ./usr/share/doc/pike7.6-pexts-mcrypt/changelog.Debian.gz
******************************************************************************
Built successfully
Purging /debian/buildd3/build/chroot-unstable/build/buildd3/pexts-0.2.0
------------------------------------------------------------------------------
(Reading database ... 60524 files and directories currently installed.)
Removing libgeoip-dev ...
Removing pike7.6-dev ...
Removing libnewt-dev ...
Removing libgeoip1 ...
Purging configuration files for libgeoip1 ...
Removing pike7.6-core ...
Purging configuration files for pike7.6-core ...
Removing libnewt0.52 ...
Purging configuration files for libnewt0.52 ...
Removing libslang2-dev ...
Removing libnettle2 ...
Purging configuration files for libnettle2 ...
******************************************************************************
Finished at 20070614-0035
Build needed 01:57:21, 5372k disk space
More information about the build-status
mailing list