[build-status: 63594] Log for successful build of pdfcube_0.0.2-3 (dist=unstable)
Build Daemon 2
buildd2 at linux-m32r.org
Thu Mar 29 20:00:08 JST 2007
Automatic build of pdfcube_0.0.2-3 on mappi005 by sbuild/m32r 0.53
Build started at 20070329-1929
******************************************************************************
Checking available source versions...
Fetching source files...
Reading package lists...
Building dependency tree...
Need to get 323kB of source archives.
Get:1 http://debian.linux-m32r.org 06_devonian/main pdfcube 0.0.2-3 (dsc) [645B]
Get:2 http://debian.linux-m32r.org 06_devonian/main pdfcube 0.0.2-3 (tar) [319kB]
Get:3 http://debian.linux-m32r.org 06_devonian/main pdfcube 0.0.2-3 (diff) [3377B]
Fetched 323kB in 3s (89.8kB/s)
Download complete and in download only mode
** Using build dependencies supplied by package:
Build-Depends: debhelper (>= 5), autotools-dev, libpoppler-dev, libpoppler-glib-dev, libgtkglext1-dev, freeglut3-dev
Checking for already installed source dependencies...
debhelper: already installed (5.0.42 >= 5 is satisfied)
autotools-dev: already installed (20060920.1)
libpoppler-dev: missing
libpoppler-glib-dev: missing
libgtkglext1-dev: missing
freeglut3-dev: missing
Checking for source dependency conflicts...
Reading package lists...
Building dependency tree...
The following extra packages will be installed:
freeglut3 libgtkglext1 libpoppler0c2-glib
The following NEW packages will be installed:
freeglut3 freeglut3-dev libgtkglext1 libgtkglext1-dev libpoppler-dev
libpoppler-glib-dev libpoppler0c2-glib
0 upgraded, 7 newly installed, 0 to remove and 5 not upgraded.
Need to get 0B/1531kB of archives.
After unpacking 5919kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
freeglut3 freeglut3-dev libgtkglext1 libgtkglext1-dev libpoppler-dev
libpoppler0c2-glib libpoppler-glib-dev
Authentication warning overridden.
Selecting previously deselected package freeglut3.
(Reading database ... 61433 files and directories currently installed.)
Unpacking freeglut3 (from .../freeglut3_2.4.0-5_m32r.deb) ...
Selecting previously deselected package freeglut3-dev.
Unpacking freeglut3-dev (from .../freeglut3-dev_2.4.0-5_m32r.deb) ...
Selecting previously deselected package libgtkglext1.
Unpacking libgtkglext1 (from .../libgtkglext1_1.0.6-2_m32r.deb) ...
Selecting previously deselected package libgtkglext1-dev.
Unpacking libgtkglext1-dev (from .../libgtkglext1-dev_1.0.6-2_m32r.deb) ...
Selecting previously deselected package libpoppler-dev.
Unpacking libpoppler-dev (from .../libpoppler-dev_0.4.5-4.1_m32r.deb) ...
Selecting previously deselected package libpoppler0c2-glib.
Unpacking libpoppler0c2-glib (from .../libpoppler0c2-glib_0.4.5-4.1_m32r.deb) ...
Selecting previously deselected package libpoppler-glib-dev.
Unpacking libpoppler-glib-dev (from .../libpoppler-glib-dev_0.4.5-4.1_m32r.deb) ...
Setting up freeglut3 (2.4.0-5) ...
Setting up freeglut3-dev (2.4.0-5) ...
Setting up libgtkglext1 (1.0.6-2) ...
Setting up libgtkglext1-dev (1.0.6-2) ...
Setting up libpoppler-dev (0.4.5-4.1) ...
Setting up libpoppler0c2-glib (0.4.5-4.1) ...
Setting up libpoppler-glib-dev (0.4.5-4.1) ...
Checking correctness of source dependencies...
Kernel: Linux 2.6.20 m32r (m32r)
Toolchain package versions: libc6-dev_2.3.6.ds1-13 linux-kernel-headers_2.6.18-7 gcc-4.1_4.1.1-21 g++-4.1_4.1.1-21 binutils_2.17-3 libstdc++6-4.1-dev_4.1.1-21 libstdc++6_4.1.1-21
------------------------------------------------------------------------------
dpkg-source: extracting pdfcube in pdfcube-0.0.2
dpkg-source: unpacking pdfcube_0.0.2.orig.tar.gz
dpkg-source: applying /debian/buildd2/build/pdfcube_0.0.2-3.diff.gz
dpkg-buildpackage: source package is pdfcube
dpkg-buildpackage: source version is 0.0.2-3
dpkg-buildpackage: source changed by Alexander Wirt <formorer at debian.org>
dpkg-buildpackage: host architecture m32r
dpkg-buildpackage: source version without epoch 0.0.2-3
/usr/bin/fakeroot debian/rules clean
dh_testdir
dh_testroot
rm -f build-stamp
# Add here commands to clean up after the build process.
/usr/bin/make distclean
make[1]: Entering directory `/build/buildd2/pdfcube-0.0.2'
make[1]: *** No rule to make target `distclean'. Stop.
make[1]: Leaving directory `/build/buildd2/pdfcube-0.0.2'
make: [clean] Error 2 (ignored)
cp -f /usr/share/misc/config.sub config.sub
cp -f /usr/share/misc/config.guess config.guess
dh_clean
debian/rules build
dh_testdir
# Add here commands to configure the package.
./configure --host=m32r-linux-gnu --build=m32r-linux-gnu --prefix=/usr --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info CFLAGS="-Wall -g -O2" LDFLAGS="-Wl,-z,defs"
checking for a BSD-compatible install... /usr/bin/ginstall -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for m32r-linux-gnu-gcc... m32r-linux-gnu-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether m32r-linux-gnu-gcc accepts -g... yes
checking for m32r-linux-gnu-gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of m32r-linux-gnu-gcc... gcc3
checking for m32r-linux-gnu-g++... m32r-linux-gnu-g++
checking whether we are using the GNU C++ compiler... yes
checking whether m32r-linux-gnu-g++ accepts -g... yes
checking dependency style of m32r-linux-gnu-g++... gcc3
checking build system type... m32r-unknown-linux-gnu
checking host system type... m32r-unknown-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by m32r-linux-gnu-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... m32r-linux-gnu-gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... m32r-linux-gnu-g++ -E
checking for m32r-linux-gnu-g77... no
checking for m32r-linux-gnu-xlf... no
checking for m32r-linux-gnu-f77... no
checking for m32r-linux-gnu-frt... no
checking for m32r-linux-gnu-pgf77... no
checking for m32r-linux-gnu-cf77... no
checking for m32r-linux-gnu-fort77... no
checking for m32r-linux-gnu-fl32... no
checking for m32r-linux-gnu-af77... no
checking for m32r-linux-gnu-xlf90... no
checking for m32r-linux-gnu-f90... no
checking for m32r-linux-gnu-pgf90... no
checking for m32r-linux-gnu-pghpf... no
checking for m32r-linux-gnu-epcf90... no
checking for m32r-linux-gnu-gfortran... no
checking for m32r-linux-gnu-g95... no
checking for m32r-linux-gnu-xlf95... no
checking for m32r-linux-gnu-f95... no
checking for m32r-linux-gnu-fort... no
checking for m32r-linux-gnu-ifort... no
checking for m32r-linux-gnu-ifc... no
checking for m32r-linux-gnu-efc... no
checking for m32r-linux-gnu-pgf95... no
checking for m32r-linux-gnu-lf95... no
checking for m32r-linux-gnu-ftn... no
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from m32r-linux-gnu-gcc object... ok
checking for objdir... .libs
checking for m32r-linux-gnu-ar... no
checking for ar... ar
checking for m32r-linux-gnu-ranlib... no
checking for ranlib... ranlib
checking for m32r-linux-gnu-strip... no
checking for strip... strip
checking if m32r-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for m32r-linux-gnu-gcc option to produce PIC... -fPIC
checking if m32r-linux-gnu-gcc PIC flag -fPIC works... yes
checking if m32r-linux-gnu-gcc static flag -static works... yes
checking if m32r-linux-gnu-gcc supports -c -o file.o... yes
checking whether the m32r-linux-gnu-gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by m32r-linux-gnu-g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the m32r-linux-gnu-g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for m32r-linux-gnu-g++ option to produce PIC... -fPIC
checking if m32r-linux-gnu-g++ PIC flag -fPIC works... yes
checking if m32r-linux-gnu-g++ static flag -static works... yes
checking if m32r-linux-gnu-g++ supports -c -o file.o... yes
checking whether the m32r-linux-gnu-g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking whether build environment is sane... yes
checking for m32r-linux-gnu-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for glib... yes
checking for gtk... yes
checking for gtkglext... yes
checking for poppler... yes
checking for poppler_glib... yes
checking GL/glut.h usability... yes
checking GL/glut.h presence... yes
checking for GL/glut.h... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: executing depfiles commands
dh_testdir
# Add here commands to compile the package.
/usr/bin/make
make[1]: Entering directory `/build/buildd2/pdfcube-0.0.2'
Making all in src
make[2]: Entering directory `/build/buildd2/pdfcube-0.0.2/src'
make[3]: Entering directory `/build/buildd2/pdfcube-0.0.2'
make[3]: Leaving directory `/build/buildd2/pdfcube-0.0.2'
if m32r-linux-gnu-g++ -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"pdfcube\" -DVERSION=\"0.0.2\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DHAVE_GL_GLUT_H=1 -I. -I. -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/gtkglext-1.0 -I/usr/lib/gtkglext-1.0/include -I/usr/X11R6/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/cairo -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/atk-1.0 -I/
usr/include/poppler -I/usr/include/poppler/glib -I/usr/include/poppler -I/usr/include/gtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -Wall -Weffc++ -g -O2 -MT pdfcube-pdfcube.o -MD -MP -MF ".deps/pdfcube-pdfcube.Tpo" -c -o pdfcube-pdfcube.o `test -f 'pdfcube.cc' || echo './'`pdfcube.cc; \
then mv -f ".deps/pdfcube-pdfcube.Tpo" ".deps/pdfcube-pdfcube.Po"; else rm -f ".deps/pdfcube-pdfcube.Tpo"; exit 1; fi
/bin/sh ../libtool --tag=CXX --mode=link m32r-linux-gnu-g++ -g -O2 -Wl,-z,defs -o pdfcube pdfcube-pdfcube.o -lglib-2.0 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lfontconfig -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXfixes -lpango-1.0 -lcairo -lX11 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -L/usr/X11R6/lib -lgtkglext-x11-1.0 -lgdkglext-x11-1.0 -lGLU -lGL -lXmu -lXt -lSM -lICE -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lfontconfig -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXfixes -lpango-1.0 -lcairo -lX11 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lpoppler -lpoppler-glib -lpoppler -lgdk_pixbuf-2.0 -lm -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lglut
mkdir .libs
m32r-linux-gnu-g++ -g -O2 -Wl,-z -Wl,defs -o pdfcube pdfcube-pdfcube.o -Wl,--export-dynamic -L/usr/X11R6/lib /usr/lib/libgtkglext-x11-1.0.so /usr/lib/libgdkglext-x11-1.0.so -lGLU -lGL -lXmu -lXt -lSM -lICE /usr/lib/libgtk-x11-2.0.so /usr/lib/libgdk-x11-2.0.so /usr/lib/libatk-1.0.so /usr/lib/libpangocairo-1.0.so -lfontconfig -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXfixes /usr/lib/libpango-1.0.so /usr/lib/libcairo.so -lX11 /usr/lib/libpoppler-glib.so /usr/lib/libpoppler.so /usr/lib/libgdk_pixbuf-2.0.so -lm /usr/lib/libgobject-2.0.so /usr/lib/libgmodule-2.0.so -ldl /usr/lib/libglib-2.0.so -lglut
make[2]: Leaving directory `/build/buildd2/pdfcube-0.0.2/src'
make[2]: Entering directory `/build/buildd2/pdfcube-0.0.2'
make[2]: Nothing to be done for `all-am'.
make[2]: Leaving directory `/build/buildd2/pdfcube-0.0.2'
make[1]: Leaving directory `/build/buildd2/pdfcube-0.0.2'
#docbook-to-man debian/pdfcube.sgml > pdfcube.1
touch build-stamp
/usr/bin/fakeroot debian/rules binary-arch
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
# Add here commands to install the package into debian/pdfcube.
/usr/bin/make DESTDIR=/build/buildd2/pdfcube-0.0.2/debian/pdfcube install
make[1]: Entering directory `/build/buildd2/pdfcube-0.0.2'
Making install in src
make[2]: Entering directory `/build/buildd2/pdfcube-0.0.2/src'
make[3]: Entering directory `/build/buildd2/pdfcube-0.0.2'
make[3]: Leaving directory `/build/buildd2/pdfcube-0.0.2'
make[3]: Entering directory `/build/buildd2/pdfcube-0.0.2/src'
make[4]: Entering directory `/build/buildd2/pdfcube-0.0.2'
make[4]: Leaving directory `/build/buildd2/pdfcube-0.0.2'
test -z "/usr/bin" || mkdir -p -- "/build/buildd2/pdfcube-0.0.2/debian/pdfcube/usr/bin"
/bin/sh ../libtool --mode=install /usr/bin/ginstall -c 'pdfcube' '/build/buildd2/pdfcube-0.0.2/debian/pdfcube/usr/bin/pdfcube'
/usr/bin/ginstall -c pdfcube /build/buildd2/pdfcube-0.0.2/debian/pdfcube/usr/bin/pdfcube
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/build/buildd2/pdfcube-0.0.2/src'
make[2]: Leaving directory `/build/buildd2/pdfcube-0.0.2/src'
make[2]: Entering directory `/build/buildd2/pdfcube-0.0.2'
make[3]: Entering directory `/build/buildd2/pdfcube-0.0.2'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/build/buildd2/pdfcube-0.0.2'
make[2]: Leaving directory `/build/buildd2/pdfcube-0.0.2'
make[1]: Leaving directory `/build/buildd2/pdfcube-0.0.2'
dh_testdir
dh_testroot
dh_installchangelogs ChangeLog
dh_installdocs
dh_installexamples
dh_installman debian/pdfcube.1
dh_link
dh_strip
dh_compress
dh_fixperms
dh_installdeb
dh_shlibdeps
dh_gencontrol
dpkg-gencontrol: warning: unknown substitution variable ${misc:Depends}
dh_md5sums
dh_builddeb
dpkg-deb: building package `pdfcube' in `../pdfcube_0.0.2-3_m32r.deb'.
dpkg-genchanges -B
dpkg-genchanges: arch-specific upload - not including arch-independent packages
dpkg-genchanges: binary-only upload - not including any source code
dpkg-buildpackage: binary only upload (no source included)
******************************************************************************
Build finished at 20070329-1957
pdfcube_0.0.2-3_m32r.changes:
Format: 1.7
Date: Thu, 15 Feb 2007 06:56:45 +0100
Source: pdfcube
Binary: pdfcube
Architecture: m32r
Version: 0.0.2-3
Distribution: unstable
Urgency: low
Maintainer: Alexander Wirt <formorer at debian.org>
Changed-By: Alexander Wirt <formorer at debian.org>
Description:
pdfcube - PDF document viewer with 3D effects
Changes:
pdfcube (0.0.2-3) unstable; urgency=low
.
* Updated manpage
Files:
72deb0b70600c8e393922fda67c368b5 18238 text optional pdfcube_0.0.2-3_m32r.deb
/debian/buildd2/build/chroot-unstable/build/buildd2/pdfcube_0.0.2-3_m32r.deb:
new debian package, version 2.0.
size 18238 bytes: control archive= 945 bytes.
1010 bytes, 14 lines control
390 bytes, 6 lines md5sums
Package: pdfcube
Version: 0.0.2-3
Section: text
Priority: optional
Architecture: m32r
Depends: freeglut3, libatk1.0-0 (>= 1.12.2), libc6 (>= 2.3.5-1), libcairo2 (>= 1.2.4), libfontconfig1 (>= 2.4.0), libgcc1 (>= 1:4.1.1-12), libgl1-mesa-glx | libgl1, libglib2.0-0 (>= 2.12.0), libglu1-mesa | libglu1, libgtk2.0-0 (>= 2.8.0), libgtkglext1, libice6 (>= 1:1.0.0), libpango1.0-0 (>= 1.14.8), libpoppler0c2 (>= 0.4.2), libpoppler0c2-glib (>= 0.4.2), libsm6, libstdc++6 (>= 4.1.1-12), libx11-6, libxcursor1 (>> 1.1.2), libxext6, libxfixes3 (>= 1:4.0.1), libxi6, libxinerama1, libxmu6, libxrandr2, libxrender1, libxt6
Installed-Size: 88
Maintainer: Alexander Wirt <formorer at debian.org>
Description: PDF document viewer with 3D effects
PDF Cube is an OpenGL API-based 3D PDF viewer that adds a compiz/Keynote-like
spinning cube trasition effect to your PDF presentations. You can also zoom on
5 predefined areas of any presentation page with a smooth zooming effect.
.
Homepage: http://code.100allora.it/pdfcube/
/debian/buildd2/build/chroot-unstable/build/buildd2/pdfcube_0.0.2-3_m32r.deb:
drwxr-xr-x root/root 0 2007-03-29 19:54 ./
drwxr-xr-x root/root 0 2007-03-29 19:52 ./usr/
drwxr-xr-x root/root 0 2007-03-29 19:50 ./usr/sbin/
drwxr-xr-x root/root 0 2007-03-29 19:53 ./usr/bin/
-rwxr-xr-x root/root 27624 2007-03-29 19:53 ./usr/bin/pdfcube
drwxr-xr-x root/root 0 2007-03-29 19:52 ./usr/share/
drwxr-xr-x root/root 0 2007-03-29 19:52 ./usr/share/doc/
drwxr-xr-x root/root 0 2007-03-29 19:53 ./usr/share/doc/pdfcube/
-rw-r--r-- root/root 1257 2007-03-29 19:34 ./usr/share/doc/pdfcube/copyright
-rw-r--r-- root/root 144 2006-12-20 06:50 ./usr/share/doc/pdfcube/changelog.gz
-rw-r--r-- root/root 2340 2006-12-20 06:50 ./usr/share/doc/pdfcube/README
-rw-r--r-- root/root 247 2007-03-29 19:34 ./usr/share/doc/pdfcube/changelog.Debian.gz
drwxr-xr-x root/root 0 2007-03-29 19:52 ./usr/share/man/
drwxr-xr-x root/root 0 2007-03-29 19:53 ./usr/share/man/man1/
-rw-r--r-- root/root 972 2007-03-29 19:34 ./usr/share/man/man1/pdfcube.1.gz
******************************************************************************
Built successfully
Purging /debian/buildd2/build/chroot-unstable/build/buildd2/pdfcube-0.0.2
------------------------------------------------------------------------------
(Reading database ... 61686 files and directories currently installed.)
Removing freeglut3-dev ...
Removing freeglut3 ...
Purging configuration files for freeglut3 ...
Removing libpoppler-glib-dev ...
Removing libpoppler-dev ...
Removing libgtkglext1-dev ...
Removing libpoppler0c2-glib ...
Purging configuration files for libpoppler0c2-glib ...
Removing libgtkglext1 ...
Purging configuration files for libgtkglext1 ...
******************************************************************************
Finished at 20070329-2000
Build needed 00:23:38, 2252k disk space
More information about the build-status
mailing list