[build-status: 57850] Log for successful build of python-clamav_0.3.3-2.1 (dist=unstable)
Build Daemon
buildd at linux-m32r.org
Tue Mar 6 06:50:49 JST 2007
Automatic build of python-clamav_0.3.3-2.1 on mappi005 by sbuild/m32r 1.7
Build started at 20070306-0642
******************************************************************************
Checking available source versions...
Fetching source files...
Reading package lists...
Building dependency tree...
Need to get 17.3kB of source archives.
Get:1 http://debian.linux-m32r.org 06_devonian/main python-clamav 0.3.3-2.1 (dsc) [672B]
Get:2 http://debian.linux-m32r.org 06_devonian/main python-clamav 0.3.3-2.1 (tar) [12.9kB]
Get:3 http://debian.linux-m32r.org 06_devonian/main python-clamav 0.3.3-2.1 (diff) [3722B]
Fetched 17.3kB in 6s (2798B/s)
Download complete and in download only mode
** Using build dependencies supplied by package:
Build-Depends: debhelper (>= 5.0.37.2), libclamav-dev, python (>= 2.3.5-11), python-support (>= 0.3), python-all-dev
Checking for already installed source dependencies...
debhelper: already installed (in sufficient version 5.0.42 >= 5.0.37.2)
libclamav-dev: missing
python: already installed (in sufficient version 2.4.4-2 >= 2.3.5-11)
python-support: already installed (in sufficient version 0.5.6 >= 0.3)
python-all-dev: missing
Checking for source dependency conflicts...
/usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install libclamav-dev python-all-dev
Reading package lists...
Building dependency tree...
The following extra packages will be installed:
libclamav2 libcurl3 libcurl3-dev libcurl3-openssl-dev libgmp3-dev libgmp3c2
libgmpxx4 python-all
Suggested packages:
libcurl3-dbg libgmp3-doc libmpfr-dev
The following packages will be REMOVED:
libcurl3-gnutls-dev*
The following NEW packages will be installed:
libclamav-dev libclamav2 libcurl3 libcurl3-dev libcurl3-openssl-dev
libgmp3-dev libgmp3c2 libgmpxx4 python-all python-all-dev
0 upgraded, 10 newly installed, 1 to remove and 18 not upgraded.
Need to get 746kB/2784kB of archives.
After unpacking 4121kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
libcurl3 libgmp3c2 libclamav2 libcurl3-openssl-dev libcurl3-dev libgmpxx4
libgmp3-dev libclamav-dev python-all python-all-dev
Authentication warning overridden.
Get:1 http://debian.linux-m32r.org 06_devonian/main libclamav2 0.90.1-1 [371kB]
Get:2 http://debian.linux-m32r.org 06_devonian/main libclamav-dev 0.90.1-1 [375kB]
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
dpkg-preconfigure: unable to re-open stdin:
Fetched 746kB in 4s (182kB/s)
(Reading database ... 63151 files and directories currently installed.)
Removing libcurl3-gnutls-dev ...
Selecting previously deselected package libcurl3.
(Reading database ... 62918 files and directories currently installed.)
Unpacking libcurl3 (from .../libcurl3_7.15.5-1_m32r.deb) ...
Selecting previously deselected package libgmp3c2.
Unpacking libgmp3c2 (from .../libgmp3c2_2%3a4.2.1+dfsg-4_m32r.deb) ...
Selecting previously deselected package libclamav2.
Unpacking libclamav2 (from .../libclamav2_0.90.1-1_m32r.deb) ...
Selecting previously deselected package libcurl3-openssl-dev.
Unpacking libcurl3-openssl-dev (from .../libcurl3-openssl-dev_7.15.5-1_m32r.deb) ...
Selecting previously deselected package libcurl3-dev.
Unpacking libcurl3-dev (from .../libcurl3-dev_7.15.5-1_all.deb) ...
Selecting previously deselected package libgmpxx4.
Unpacking libgmpxx4 (from .../libgmpxx4_2%3a4.2.1+dfsg-4_m32r.deb) ...
Selecting previously deselected package libgmp3-dev.
Unpacking libgmp3-dev (from .../libgmp3-dev_2%3a4.2.1+dfsg-4_m32r.deb) ...
Selecting previously deselected package libclamav-dev.
Unpacking libclamav-dev (from .../libclamav-dev_0.90.1-1_m32r.deb) ...
Selecting previously deselected package python-all.
Unpacking python-all (from .../python-all_2.4.4-2_all.deb) ...
Selecting previously deselected package python-all-dev.
Unpacking python-all-dev (from .../python-all-dev_2.4.4-2_all.deb) ...
Setting up libcurl3 (7.15.5-1) ...
Setting up libgmp3c2 (4.2.1+dfsg-4) ...
Setting up libclamav2 (0.90.1-1) ...
Setting up libcurl3-openssl-dev (7.15.5-1) ...
Setting up libcurl3-dev (7.15.5-1) ...
Setting up libgmpxx4 (4.2.1+dfsg-4) ...
Setting up libgmp3-dev (4.2.1+dfsg-4) ...
Setting up libclamav-dev (0.90.1-1) ...
Setting up python-all (2.4.4-2) ...
Setting up python-all-dev (2.4.4-2) ...
Checking correctness of source dependencies...
------------------------------------------------------------------------------
dpkg-source: extracting python-clamav in python-clamav-0.3.3
dpkg-source: unpacking python-clamav_0.3.3.orig.tar.gz
dpkg-source: applying /debian/buildd/build/python-clamav_0.3.3-2.1.diff.gz
dpkg-buildpackage: source package is python-clamav
dpkg-buildpackage: source version is 0.3.3-2.1
dpkg-buildpackage: source changed by Stephen Gran <sgran at debian.org>
dpkg-buildpackage: host architecture m32r
dpkg-buildpackage: source version without epoch 0.3.3-2.1
/usr/bin/fakeroot debian/rules clean
dh_testdir
python2.4 setup.py clean
running clean
dh_testroot
rm -rf build build-python2.4
dh_clean
debian/rules build
python2.4 setup.py build
running build
running build_ext
building 'pyclamav' extension
creating build
creating build/temp.linux-m32r-2.4
gcc -pthread -fno-strict-aliasing -DNDEBUG -g -O2 -Wall -Wstrict-prototypes -fPIC -I/usr/local/include -I/usr/include/python2.4 -c pyclamav.c -o build/temp.linux-m32r-2.4/pyclamav.o
creating build/lib.linux-m32r-2.4
gcc -pthread -shared build/temp.linux-m32r-2.4/pyclamav.o -L/usr/local/lib -lclamav -o build/lib.linux-m32r-2.4/pyclamav.so
touch build-python2.4
touch build
/usr/bin/fakeroot debian/rules binary-arch
touch build
dh_testdir
dh_testroot
dh_installdirs
python2.4 setup.py install --root /build/buildd/python-clamav-0.3.3/debian/python-clamav
running install
running build
running build_ext
running install_lib
creating /build/buildd/python-clamav-0.3.3/debian/python-clamav/usr
creating /build/buildd/python-clamav-0.3.3/debian/python-clamav/usr/lib
creating /build/buildd/python-clamav-0.3.3/debian/python-clamav/usr/lib/python2.4
creating /build/buildd/python-clamav-0.3.3/debian/python-clamav/usr/lib/python2.4/site-packages
copying build/lib.linux-m32r-2.4/pyclamav.so -> /build/buildd/python-clamav-0.3.3/debian/python-clamav/usr/lib/python2.4/site-packages
dh_testdir
dh_testroot
dh_installchangelogs CHANGELOG
dh_installdocs
dh_installexamples example.py
dh_link
dh_strip
dh_compress
dh_fixperms
dh_pysupport
dh_python
dh_python: Doing nothing since dh_pycompat exists; dh_pysupport or dh_pycentral should do the work. You can remove dh_python from your rules file.
dh_makeshlibs
dh_installdeb
dh_shlibdeps
dh_gencontrol
dpkg-gencontrol: warning: unknown substitution variable ${misc:Depends}
dh_md5sums
dh_builddeb
dpkg-deb: building package `python-clamav' in `../python-clamav_0.3.3-2.1_m32r.deb'.
dpkg-genchanges -B
dpkg-genchanges: arch-specific upload - not including arch-independent packages
dpkg-genchanges: binary-only upload - not including any source code
dpkg-buildpackage: binary only upload (no source included)
******************************************************************************
Build finished at 20070306-0648
chroot-unstable/build/buildd/python-clamav_0.3.3-2.1_m32r.deb:
new debian package, version 2.0.
size 17138 bytes: control archive= 913 bytes.
484 bytes, 12 lines control
553 bytes, 7 lines md5sums
237 bytes, 7 lines * postinst #!/bin/sh
214 bytes, 7 lines * prerm #!/bin/sh
Package: python-clamav
Version: 0.3.3-2.1
Section: python
Priority: optional
Architecture: m32r
Depends: libc6 (>= 2.3.5-1), libclamav2 (>= 0.90.1), python (<< 2.5), python-support (>= 0.3.4), python (>= 2.4), clamav-freshclam | clamav-data
Provides: python2.4-clamav
Installed-Size: 96
Maintainer: Cédric Delfosse <cedric at debian.org>
Description: Python bindings to ClamAV
This package adds virus detection capabilities to Python software, thanks to
the ClamAV antivirus toolkit.
chroot-unstable/build/buildd/python-clamav_0.3.3-2.1_m32r.deb:
drwxr-xr-x root/root 0 2007-03-06 06:47 ./
drwxr-xr-x root/root 0 2007-03-06 06:47 ./usr/
drwxr-xr-x root/root 0 2007-03-06 06:47 ./usr/share/
drwxr-xr-x root/root 0 2007-03-06 06:47 ./usr/share/doc/
drwxr-xr-x root/root 0 2007-03-06 06:47 ./usr/share/doc/python-clamav/
drwxr-xr-x root/root 0 2007-03-06 06:47 ./usr/share/doc/python-clamav/examples/
-rw-r--r-- root/root 1415 2007-03-06 06:45 ./usr/share/doc/python-clamav/examples/example.py.gz
-rw-r--r-- root/root 1077 2007-03-06 06:45 ./usr/share/doc/python-clamav/copyright
-rw-r--r-- root/root 1129 2006-04-23 07:29 ./usr/share/doc/python-clamav/changelog.gz
-rw-r--r-- root/root 2106 2006-04-23 07:29 ./usr/share/doc/python-clamav/README.txt
-rw-r--r-- root/root 6854 2006-04-23 07:29 ./usr/share/doc/python-clamav/gpl.txt.gz
-rw-r--r-- root/root 567 2007-03-06 06:45 ./usr/share/doc/python-clamav/changelog.Debian.gz
drwxr-xr-x root/root 0 2007-03-06 06:47 ./usr/share/python-support/
drwxr-xr-x root/root 0 2007-03-06 06:47 ./usr/share/python-support/python-clamav/
drwxr-xr-x root/root 0 2007-03-06 06:47 ./usr/lib/
drwxr-xr-x root/root 0 2007-03-06 06:47 ./usr/lib/python-support/
drwxr-xr-x root/root 0 2007-03-06 06:47 ./usr/lib/python-support/python-clamav/
drwxr-xr-x root/root 0 2007-03-06 06:47 ./usr/lib/python-support/python-clamav/python2.4/
-rw-r--r-- root/root 8060 2007-03-06 06:47 ./usr/lib/python-support/python-clamav/python2.4/pyclamav.so
python-clamav_0.3.3-2.1_m32r.changes:
Format: 1.7
Date: Sat, 3 Mar 2007 11:56:52 +0000
Source: python-clamav
Binary: python-clamav
Architecture: m32r
Version: 0.3.3-2.1
Distribution: unstable
Urgency: low
Maintainer: Cédric Delfosse <cedric at debian.org>
Changed-By: Stephen Gran <sgran at debian.org>
Description:
python-clamav - Python bindings to ClamAV
Closes: 410902
Changes:
python-clamav (0.3.3-2.1) unstable; urgency=low
.
* Non-maintainer upload.
* Update to new clamav API
* Fix clean target (closes: #410902)
Files:
00870f3a48a45470866256a9c064fb65 17138 python optional python-clamav_0.3.3-2.1_m32r.deb
******************************************************************************
Built successfully
NOTE: The package could have used binaries from the following packages
(access time changed) without a source dependency:
python-dev: /usr/bin/python
Purging chroot-unstable/build/buildd/python-clamav-0.3.3
------------------------------------------------------------------------------
/usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install libcurl3-gnutls-dev*
Reading package lists...
Building dependency tree...
Note, selecting libcurl3-gnutls-dev for regex 'libcurl3-gnutls-dev*'
The following extra packages will be installed:
libcurl3-gnutls-dev
The following packages will be REMOVED:
libclamav-dev* libcurl3-dev* libcurl3-openssl-dev*
The following NEW packages will be installed:
libcurl3-gnutls-dev
0 upgraded, 1 newly installed, 3 to remove and 18 not upgraded.
Need to get 0B/746kB of archives.
After unpacking 864kB disk space will be freed.
WARNING: The following packages cannot be authenticated!
libcurl3-gnutls-dev
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
dpkg-preconfigure: unable to re-open stdin:
Authentication warning overridden.
(Reading database ... 63234 files and directories currently installed.)
Removing libclamav-dev ...
Removing libcurl3-dev ...
Removing libcurl3-openssl-dev ...
Selecting previously deselected package libcurl3-gnutls-dev.
(Reading database ... 62982 files and directories currently installed.)
Unpacking libcurl3-gnutls-dev (from .../libcurl3-gnutls-dev_7.15.5-1_m32r.deb) ...
Setting up libcurl3-gnutls-dev (7.15.5-1) ...
/usr/bin/sudo dpkg --root=/debian/buildd/build/chroot-unstable --purge libgmpxx4 libcurl3 libcurl3-dev libclamav-dev libgmp3c2 python-all-dev python-all libcurl3-openssl-dev libgmp3-dev libclamav2
dpkg - warning: ignoring request to remove libcurl3-dev which isn't installed.
dpkg - warning: ignoring request to remove libclamav-dev which isn't installed.
(Reading database ... 63215 files and directories currently installed.)
Removing python-all-dev ...
Removing python-all ...
dpkg - warning: ignoring request to remove libcurl3-openssl-dev which isn't installed.
Removing libgmp3-dev ...
Removing libclamav2 ...
Purging configuration files for libclamav2 ...
Removing libgmpxx4 ...
Purging configuration files for libgmpxx4 ...
Removing libcurl3 ...
Purging configuration files for libcurl3 ...
Removing libgmp3c2 ...
Purging configuration files for libgmp3c2 ...
******************************************************************************
Finished at 20070306-0650
Build needed 00:03:44, 304k disk space
More information about the build-status
mailing list